DBH 5831Sil radial shaft seal — 38.1 x 60.3 x 15.87

DBH 5831Sil is a reference of radial shaft seal, within Seals. Request a quote for 5831Sil via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 5831Sil radial shaft seal is a lip seal that closes off the passage of oil or grease in equipment with a rotating shaft. It is mounted in the housing and rides on the shaft to prevent leaks and the ingress of dust. Due to its dimensions of 38.10 mm shaft, 60.30 mm housing and 15.87 mm height, it is used in gearboxes, pumps and motors where axial space is limited. MR Accesorios Industriales sells it as part of its seals and oil seals line.

This item is an oil seal of A 083 design, with the indicated dimensions: shaft diameter 38.10 mm, housing diameter 60.30 mm and height 15.87 mm. The A 083 design corresponds to a single-lip seal with a spring, intended for rotating shafts with lubrication. The 5831Sil nomenclature identifies the part within the DBH line. Before mounting, check that your shaft and housing dimensions match these values, because a seal with a different height or diameter will not seal correctly.

It is used in applications where lubricant must be retained and contaminants excluded: gearboxes, centrifugal pumps, electric motors, rollers and transmission equipment. It also appears in agricultural and industrial machinery that works with dust or water. In all cases, the seal is mounted with the lip facing the side of the fluid to be retained and with the spring facing inward. If the equipment has a lot of vibration or misalignment, it is advisable to evaluate a design with greater rigidity or a double-lip seal.

To select this seal properly, take into account the shaft speed, the working temperature and the type of lubricant. The shaft surface must be ground and free of marks; if there is wear, the lip does not seat properly and leakage appears. The housing must be clean and free of burrs. When mounting, lubricate the lip with the same oil or grease as the equipment and use a support tube so as not to damage it. If the previous seal failed, also check the bearing clearance and the shaft concentricity.

To quote the code 5831Sil or the dimensions of your shaft, housing and height, send them to us. With that data we search the DBH line and other brands we carry. We can also advise you if the A 083 design is not suitable for your application and a different type of lip or material is needed. The more data you give us — speed, temperature, fluid — the better the proposal will be.

To request a quote for the DBH 5831Sil oil seal, send the code via WhatsApp to MR Accesorios Industriales. If you have doubts about the size, attach a photo of the old seal or the dimensions taken with a caliper. That way we confirm that the part matches your equipment before preparing the quote.