Radial shaft seal DBH 5029Vit — 35.00 x 62.00 x 10.00

DBH 5029Vit is a radial shaft seal reference, within Seals. Request a quote for 5029Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 5029Vit radial shaft seal is a lip seal that mounts on the shaft and seals against the housing to retain lubricant and block the entry of dust, water or particles. Its Lx design and its dimensions of 35 mm shaft, 62 mm housing and 10 mm height make it suitable for rotating equipment where a reliable, low-maintenance barrier is required. MR Accesorios Industriales offers it as part of its line of industrial seals.

This DBH 5029Vit oil seal has a shaft diameter of 35 mm, a housing diameter of 62 mm and a height of 10 mm. Its Lx design corresponds to a single-lip seal with an outer metal case, designed to be press-fitted into the housing bore and to seal against the rotating shaft. The 5029Vit designation identifies the size and the construction type within the DBH line, and it is the reference to quote when ordering a replacement or a nearby size.

It is used in gearboxes, pumps, electric motors, conveyor rollers and transmission equipment where a shaft rotates inside a housing and oil or grease must be contained. It also appears in applications with moderate exposure to dust or splashes, where the sealing lip keeps contaminants from reaching the bearings or bushings. It is a wear part: when the lip hardens, tears or loses its elasticity, lubricant loss begins to appear.

To select a seal correctly, you must verify the shaft and housing dimensions, the condition of the shaft surface — it must be polished and free of grooves — and the type of lubricant. The Lx design is mounted with the lip facing the fluid to be retained. During installation, it is advisable to lubricate the lip, use an installation tool that does not damage it, and make sure the seal enters perpendicular to the housing. If the shaft shows wear, one option is to mount the seal with a slight axial offset so that the lip rests on a new track.

If you need a seal equivalent to the 5029Vit, or a nearby size because the shaft or housing has a different dimension, the most practical approach is to send the part number and the current dimensions. With that data, an alternative can be found within the same DBH line or from another brand that MR carries, always confirming the manufacturer's data sheet. Design variants can also be evaluated if the application requires greater resistance to dust or temperature.

MR Accesorios Industriales carries the DBH brand as part of its catalog of seals and oil seals. If you want a quote for the 5029Vit or to ask about an equivalent size, send the part number on WhatsApp and we will reply with the available technical information.