Product page
Radial shaft seal DBH 5029 — 35.00 x 62.00 x 10.00
- Manufacturer Part Number
- 5029
- Brand
- DBHOfficial brand
- Category
- Seals
- Subcategory
- Radial shaft seals
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DBH 5029 is a radial shaft seal reference, within Seals. Request a quote for 5029 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The DBH 5029 radial shaft seal is a lip seal that mounts in the housing and seals against the rotating shaft. Its function is to retain lubricant inside the assembly and prevent the entry of dust, water or particles. It is used in gearboxes, pumps, electric motors and power transmission equipment. Its dimensions are 35 mm shaft, 62 mm housing and 10 mm height, with Lx design.
This item is a radial shaft seal from the DBH line, identified with part number 5029. According to the product page data, it corresponds to a shaft of 35 mm diameter, a housing of 62 mm and a total height of 10 mm. The indicated design is Lx, which defines the geometry of the lip and the outer body. It is a standard-section component for rotating shafts with permanent lubrication.
Seals of this size are found in equipment where a shaft rotates inside a fixed housing: gearboxes, centrifugal pumps, electric motors, mixers and conveyors. They also appear in automotive and agricultural machinery applications. The 35 x 62 x 10 combination is common on low and medium speed power transmission shafts, where the goal is to contain oil or grease and protect the bearings from the environment.
To install a seal, check the condition of the shaft: no burrs, no wear and with the appropriate roughness. The housing must be clean and free of deformation. It is advisable to lubricate the lip before inserting it and to use an installation tool that presses on the outer diameter, never on the lip. If the shaft shows a deep groove, consider a neighboring size or a design with an auxiliary lip.
If you need an equivalent or a close size, send us part number 5029 or your current dimensions: shaft diameter, housing diameter and height. With that data we review alternatives within the DBH line or from other brands we carry. We can also advise you on the most suitable lip design according to the type of lubricant and the working conditions.
MR Accesorios Industriales carries the DBH brand. If you want to request a quote, send part number 5029 by WhatsApp along with the quantity and dimensions. We will reply with the alternative that best fits your equipment.
Dimensions
- Shaft (d)
- 35mm
- Housing bore (D)
- 62mm
- Height (h)
- 10.00mm
- Design
- Lx
Frequently Asked Questions
- What are the dimensions of the DBH 5029 oil seal?
- It corresponds to a 35 mm shaft, a 62 mm housing and a 10 mm height. The design is Lx. These are the dimensions listed on the manufacturer's product page and are used to identify the replacement.
- How do I know if this oil seal replaces the one I have installed?
- Measure the shaft diameter, the housing inner diameter and the width of the old seal. If they match 35, 62 and 10 mm, the 5029 is the direct replacement. If there are differences, ask us about a neighboring size.
- What care should I take when installing it?
- Clean the housing, check that the shaft has no burrs or wear and lubricate the lip before inserting it. Use a tool that presses on the outer diameter. Avoid hitting the lip or deforming the seal body.