Skip to content
All products

Brand we market

SKF linear motion: bearings, units and shaft blocks

The SKF linear motion line gathers what is needed for a part to travel along a round guide shaft: linear ball bearings, the units that carry them already fitted in a housing and the blocks that support the shaft. They are used on carriages, tables, cutting devices and packaging machines. They are straight-travel systems: the bearing does not rotate, it slides along.

See all SKF linear motion references →SKF guide →Linear motion units from all brands →SKF timing belts →SKF sprockets →

SKF linear motion units series: all part numbers

Bearing, unit or shaft block

In almost every reference, the number is the diameter of the guide shaft in millimetres. LBBR 12-2LS/HV6 is a compact linear ball bearing for a 12 shaft, and the final blocks describe its seals and execution. LUHR 12-2LS is a unit: the same type of bearing already fitted in a housing with fixing holes.

LTDR 12-2LS is another form of unit for the same shaft, and LSCS 12 is not a bearing but a block that holds the end of the guide shaft. LPAR 12 belongs to another family of elements for that diameter. Building a guide takes parts of more than one type, all of the same diameter, and each is ordered by its designation.

The guide shaft is part of the bearing

The balls of the linear bearing roll directly on the shaft. That is why the shaft must be a hardened and ground precision shaft; on ordinary bar the balls wear grooves and the movement sticks. If the carriage has become stiff or loose, look at the shaft before replacing the bearing alone.

A linear ball bearing carries load perpendicular to the shaft, not rotation or large moments. That is why carriages have two shafts and four supports, or tandem units. The alignment between the two shafts has the greatest influence on smoothness: if they are not parallel, the bearings bind over part of the travel. Seals matter when there is dust or swarf.

Details for quoting the guide

Send us the complete designations and the quantity of each part. Without a code, state the guide shaft diameter, the outside diameter and the length of the bearing, and whether it is loose or in a unit with its housing. Tell us the travel length, the load, the environment and whether you also need the shaft or its blocks. A photo of the assembled carriage shows the layout.

Is the number the shaft diameter?

In these series, yes, in millimetres. Confirm it by measuring the guide shaft.

Can I use ordinary steel bar as the shaft?

It is not advisable. The balls need a hardened and ground shaft.

Unit or loose bearing?

The unit includes the housing and is bolted on; the loose bearing goes in a housing that is part of the machine.

Products 126 results

Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.

Ask via WhatsAppAsk via email

Main series

SKF LBC series linear bearings

SKF LBC series linear bearings are linear motion components that allow smooth and precise movement on cylindrical shafts or guides. They are used in applications requiring high rigidity, low friction and load capacity in tight spaces. MR Accesorios Industriales carries this line as part of its linear motion offering. If you need advice on choosing the right model, our technical team can help you identify the correct reference for your application.

Some codes:LBC4-0092LBC4-0103LBC4-0107LBC4-0109LBC4-0110

SKF LPAR Series Linear Units

SKF LPAR series linear units are guide assemblies with carriage and rail designed for precise, repeatable linear motion. They are used in machine axes, gantries and positioning systems where rigidity and low friction are required. MR Accesorios Industriales carries this line as a brand, with technical advice to select the right size according to the load and travel of each application.

Some codes:LPAR 12LPAR 16LPAR 20LPAR 25LPAR 30

SKF LSCS Series Linear Units

SKF LSCS series linear units are guidance components that combine a carriage with bearings and a profile rail, designed for smooth and precise linear movements. They are used in applications requiring high rigidity and repeatability, such as machine tools, automation equipment and handling systems. At MR Accesorios Industriales we carry this line so you can choose the right size for your design.

Some codes:LSCS 12LSCS 16LSCS 20LSCS 25LSCS 50

Send us the SKF part number

Just the manufacturer part number is enough: we will quote it and provide dimensions and equivalents via WhatsApp or email.

Request a SKF quote on WhatsApp
Request a quote on WhatsApp