SKF Linear motion

SKF LBC series linear bearings are linear motion components that allow smooth and precise movement on cylindrical shafts or guides. They are used in applications requiring high rigidity, low friction and load capacity in tight spaces. MR Accesorios Industriales carries this line as part of its linear motion offering. If you need advice on choosing the right model, our technical team can help you identify the correct reference for your application.

The LBC series designation consists of an alphabetic prefix and an identification number. For example, LBC4-0092 indicates an LBC series linear bearing with a specific numeric code that defines its dimensions and internal characteristics. The numeric suffixes do not follow a strict sequential order, so each reference must be checked individually. To select the correct component, it is essential to know the shaft diameter, the load to be supported and the mounting conditions. If you have any doubts, send us the complete code and we will advise you.

These linear bearings are used in a wide variety of industries in Argentina, such as automotive, metalworking, food and pharmaceutical. They are common in packaging machines, automation equipment, internal transport systems, presses and measuring devices. Their design allows high-precision linear movements with minimal friction, making them ideal for applications requiring repeatability and smooth travel. They are also used in machine tools and material handling equipment.

For correct selection, take into account the type of sealing required according to the working environment: in the presence of dust or chips, additional sealing is advisable. Proper lubrication is key to extending service life; check the compatibility of the lubricant with the bearing material. Alignment between the shaft and the housing must be precise to avoid undue lateral loads. Internal clearance and preload influence the rigidity and precision of the system. Follow the manufacturer's recommendations for mounting and fastening.

Regarding equivalences and interchangeability, LBC series linear bearings may have equivalents in other brands, but dimensions and tolerances can vary. It is important to verify the technical specifications before replacing a component. Not all linear bearings are directly interchangeable; factors such as shaft diameter, length and cage type must match. If you need to replace an existing bearing, contact us with the original code and we will help you find the best available option.

To request a quote or ask about an SKF LBC series linear bearing, send us the complete code via WhatsApp. At MR Accesorios Industriales we have more than 80 years of experience in the field and can advise you so you find the right component for your application. Do not hesitate to write to us; our technical team is here to help you.

SKF LPAR series linear units are guide assemblies with carriage and rail designed for precise, repeatable linear motion. They are used in machine axes, gantries and positioning systems where rigidity and low friction are required. MR Accesorios Industriales carries this line as an official brand, with technical advice to select the right size according to the load and travel of each application.

The series designation is read in blocks: the letters identify the family and the number that follows indicates the size of the unit. In the examples LPAR 12, LPAR 16, LPAR 20, LPAR 25, LPAR 30 and LPAR 50, that number increases from smaller to larger and defines the load capacity and the rail width. Before requesting a quote, it is best to have on hand the complete code engraved on the carriage or on the label of the assembly.

These units are used in industrial automation, machine tools, packaging equipment, material handling and test benches. In Argentina they appear in production lines, robotic cells and positioning tables where stable guidance along the entire travel is sought. They are also chosen in retrofits of existing equipment when a sliding system needs to be replaced with a rolling one.

To select correctly, take into account the load per carriage, the tilting moment, the length and parallelism of the rails, and the working environment. In areas with dust or chips, it is advisable to provide protections and adequate lubrication; in applications with a high cycle frequency, check the clearance and alignment before mounting. A poorly seated rail shortens the life of the assembly even if the unit is the right one.

Among brands, linear units are compared by size, carriage type, load capacity and mounting method. There is no universal equivalence table: two similar codes can differ in height, holes or preload. If you are replacing an existing assembly, send us the rail and carriage measurements, or the complete code, and we verify interchangeability before quoting.

If you already have the LPAR code on hand, write to us on WhatsApp and we'll send you the quote. At MR Accesorios Industriales we have more than 80 years in the trade and can guide you on the size, protections and lubrication for your application.

SKF LSCS series linear units are guidance components that combine a carriage with bearings and a profile rail, designed for smooth and precise linear movements. They are used in applications requiring high rigidity and repeatability, such as machine tools, automation equipment and handling systems. At MR Accesorios Industriales we carry this line so you can choose the right size for your design.

The LSCS series designation is completed by a number indicating the nominal rail size, as in LSCS 12, LSCS 16 or LSCS 25. That number defines the main dimensions and the load capacity of the assembly. When selecting, take into account the available space and the required rigidity; the suffix may indicate precision or sealing variants, but check the full part number to confirm the exact configuration.

These units are used in industries such as metalworking, food and automation. In Argentina, they are common in machining centers, Cartesian robots, cutting tables and internal transport systems. Their design allows repetitive movements with low friction, making them suitable for fast cycles and exact positioning.

For correct mounting, check the alignment of the rails and the support surface; misalignment accelerates wear. Proper lubrication and sealing protect against contaminants. If the environment has dust or chips, choose versions with additional seals. The internal clearance must be appropriate for your application: too tight increases friction, too loose reduces precision.

Linear units from different brands can be interchanged if dimensions and capacities match. However, always check the tolerances and the type of internal bearing. The SKF LSCS series is a reliable reference, and at MR Accesorios Industriales we can advise you on compatible alternatives.

To receive a quote, send us the full part number on WhatsApp, for example LSCS 20, and we will reply shortly with the information you need.