FAG Bearings

FAG super precision bearings are components designed for applications where rotational accuracy, rigidity and repeatability are critical. They are used in machine tool spindles, measuring equipment, instrumentation and high-speed drives. MR Accesorios Industriales supplies this line backed by more than 80 years in the Argentine industrial market. If you need assistance identifying the right model, write to us via WhatsApp with the part number or the dimensions of your application.

The designation of these bearings is organized in blocks. The initial letter B indicates that it is a super precision bearing of the corresponding series. The number that follows, as in B7000-C-T-P4S or B7005-C-T-P4S, identifies the size and dimensional series. The suffix C defines the contact angle, while T indicates the cage type and P4S the precision class. Each combination of suffixes responds to a specific application, so it is advisable to verify the complete part number before requesting a quote.

In Argentine industry, these bearings are used in milling machine, grinding machine and machining center spindles, where speed and precision are decisive. They also appear in metrology equipment, rotary tables, deep drilling heads and high-frequency drives. Their ability to maintain dimensional accuracy under combined loads makes them suitable for fine machining and precision grinding processes. MR Accesorios Industriales supplies them for workshops and plants that require reliable components for their critical machines.

To select the correct bearing, take into account the load type, rotational speed and required precision level. The suffix C defines the contact angle and conditions axial load capacity; P4S indicates a high precision class, suitable for spindles. Lubrication must be the one specified for high speeds, and assembly requires rigorous cleanliness, precise alignment and preload control. Incorrect assembly can affect accuracy and reduce the service life of the component.

When looking for equivalents between brands, it is common to find super precision bearings with similar but not identical designations. Letters and numbers may vary by manufacturer, and an equivalent part number does not always offer the same tolerances or load capacity. Therefore, before replacing a bearing, it is advisable to compare technical specifications and consult a specialist. MR Accesorios Industriales can guide you to find the right option within its product line.

If you already have the part number of your FAG super precision bearing, send it via WhatsApp to MR Accesorios Industriales and we will quote you shortly. If you cannot find it, write to us with the dimensions, application type and working conditions, and we will help you identify the model you need.

FAG super precision bearings are components designed for applications where running accuracy, rigidity and repeatability are critical. They are used in machine tool spindles, measuring equipment, optical instruments and high-end positioning systems. MR Accesorios Industriales supplies this line as a brand, backed by more than 80 years in the Argentine industrial market.

The designation of these bearings is read in blocks. The letter B indicates that it is a super precision bearing of the corresponding series. The number that follows — as in B7000-E-T-P4S or B7004-E-T-P4S — identifies the size. The suffix E indicates a design with optimized contact angle; T refers to the design with a synthetic material cage; P4S indicates the precision class and the dimensional and running tolerances. Each combination defines the behavior of the bearing in service.

These bearings are used in spindles of milling machines, grinding machines and machining centers, where speed and precision are decisive. They are also found in measuring heads, rotary tables, inspection equipment and high-accuracy drive systems. In Argentina, the metalworking, automotive, aeronautical and capital goods sectors rely on this line to maintain the quality of their production processes.

To select the correct bearing, take into account the axial and radial load, the rotational speed and the lubrication conditions. Mounting requires rigorous cleanliness, precise alignment and preload control. The T cage and the sealing or protection must be chosen according to the environment: contamination, humidity or temperature. Proper lubrication — grease or oil — and internal clearance are factors that define the service life of the assembly.

FAG super precision bearings can be interchanged with those of other manufacturers that follow the same dimensional standards and precision classes. Equivalence is established by the complete part number, the design type and the tolerance level. Diameter and width alone are not enough: contact angle, cage and class must be verified. If you need to replace a bearing, send us the original part number and we will help you find the equivalent reference.

At MR Accesorios Industriales we work with the FAG line so you can solve your high-precision applications. If you have the part number of the bearing you need, write to us on WhatsApp and we will send you a quote shortly. We can also advise you if you are defining the configuration of a spindle or new equipment.

FAG HCB series super precision bearings are components designed for extreme demands of speed and accuracy. They are used in machine tool spindles, measuring equipment and systems where the slightest vibration or deviation affects the result. MR Accesorios Industriales supplies this line as a brand, with technical advice to select the correct configuration for the application.

The designation of these bearings is read in blocks. HCB indicates the super precision series with ceramic balls and a thinner outer ring. The four-digit number identifies the size: the examples range from HCB7000 to HCB7007. The suffix C defines the contact angle, T the cage type, and P4S the tolerance class and internal clearance. Each combination responds to a specific use, so it is advisable to verify the complete code before requesting a quote.

In Argentine industry, these bearings are used in milling machine, grinding machine and machining center spindles, where rigidity and repeatability are critical. They also appear in metrology equipment, high-speed drilling heads and positioning systems. Their ability to rotate at high speeds with low heat generation makes them suitable for sustained precision machining processes.

To select the correct bearing, take into account the type of load, the rotation speed and the required precision level. Mounting demands extreme cleanliness, careful alignment and adequate lubrication, whether with grease or oil, depending on the operating regime. The sealing and internal clearance must be chosen based on the environment and the expected thermal expansion. Incorrect mounting negates the advantages of super precision.

Super precision bearings are manufactured under dimensional standards that allow them to be interchanged between brands, provided the series, contact angle, tolerance class and clearance match. Matching only the size number is not enough. When requesting a quote, it is advisable to provide the complete code and, if possible, the brand and model of the equipment where it will be installed, to avoid substitutions that do not meet the requirements.

If you need a FAG HCB series super precision bearing, write to us by WhatsApp with the code or model you are looking for. At MR Accesorios Industriales we respond promptly with the technical information and the corresponding quote.

FAG spherical roller bearings are self-aligning double-row components designed to withstand high radial loads and axial loads in both directions, even with shafts that experience flexing or misalignment. Their self-aligning design compensates for mounting errors and deflections without losing load capacity. They are used in demanding industrial applications where robustness and durability are critical, such as transmissions, pumps, fans and continuous process equipment. MR Accesorios Industriales supplies this line with technical advice to select the right version.

The designation of the 230 series with suffixes BEA, XL and MB1 reads as follows: the number 230 identifies the medium-section spherical roller bearing series; BEA indicates an optimized internal design with a two-piece machined brass cage guided by the inner ring; XL indicates the X-life version, with improved contact surfaces for longer service life; MB1 corresponds to the solid brass cage. The examples 230/500-BEA-XL-MB1 and 230/530-BEA-XL-MB1 show how the bore diameter is expressed in millimeters when it exceeds a certain value, in this case 500 mm and 530 mm. This nomenclature makes it possible to quickly identify the design features of each variant.

In Argentine industry, these bearings are used in mining, cement, steel, paper and pulp equipment, as well as in large gearboxes, mills, crushers and continuous process machines. Their ability to withstand combined loads and misalignment makes them suitable for applications where the shaft flexes or where the housings are not perfectly aligned. They are also found in industrial fans, high-flow pumps and heavy conveyors, where reliability and reduced maintenance are priorities.

To correctly select a spherical roller bearing, take into account the radial and axial load, the rotation speed, the type of lubrication and the environmental conditions. The BEA version with brass cage offers good resistance to elevated temperatures and shock loads. Mounting requires initial alignment and adequate lubrication; in applications with contamination, consider additional seals. The XL series provides longer life thanks to tighter tolerances and better surface finish. Always verify the internal clearance and the mounting method to avoid damage.

Regarding equivalences and interchangeability, spherical roller bearings from different brands may differ in internal design, cage and tolerances. Although the main dimensions usually follow international standards, it is essential to verify the complete designation and the operating conditions before replacing one brand with another. The 230 series with suffixes BEA, XL and MB1 has equivalents from other manufacturers, but performance may vary. Consult our technical team to validate compatibility in your specific application.

To receive a quote for FAG spherical roller bearings, write to us on WhatsApp with the complete part number you need, for example 230/600-BEA-XL-MB1. At MR Accesorios Industriales we advise you on choosing the right version for your equipment and we reply promptly. More than 80 years of experience in the industrial sector back us up.

FAG spherical roller bearings are self-aligning double-row components designed to withstand high radial loads and axial loads in both directions, even with misaligned or flexed shafts. Their spherical outer raceway and guided cage allow stable operation under demanding conditions. MR Accesorios Industriales supplies this line as a brand, with technical advice to select the correct part number for your application.

The 230 series designation is read from left to right: the base number indicates the size and dimension series; the suffix BEA defines the internal design with brass cage and optimized machining; XL corresponds to the high load capacity execution; K indicates the tapered bore (taper 1:12); MB identifies the solid brass cage guided by the inner ring. The final digit, as in 230/500-BEA-XL-K-MB1, distinguishes execution variants within the same series. Understanding these suffixes prevents errors when ordering a replacement.

These bearings are used in equipment with long shafts or shafts subjected to bending, where perfect alignment is not guaranteed. In Argentina they are found in conveyor belts, mills, crushers, high-flow centrifugal pumps, industrial fans and paper machines. Also in gearboxes and drives in mining, cement and steelmaking, where loads are high and working conditions are severe. Their self-aligning capability makes them suitable for assemblies with split housings or housings that allow some misalignment.

To select the correct bearing, take into account the radial and axial load, the rotation speed and the type of lubrication. The tapered bore K requires an adapter sleeve or a controlled interference fit; verify the shaft taper before installing. The MB solid brass cage is suitable for high temperatures and shock loads. Sealing will depend on the environment: in the presence of dust or moisture, it is recommended to complement with oil seals or protection plates. Initial alignment and adequate lubrication extend the service life of the assembly.

When looking for equivalents, remember that each manufacturer uses its own suffixes to indicate design, cage and tolerances. A bearing from another brand with similar dimensions may not be interchangeable if the internal execution or clearance changes. Always verify the complete part number and technical specifications before replacing. MR Accesorios Industriales can advise you on the correspondence between designations, but final validation must be done with the original manufacturer's tables.

If you need a FAG spherical roller bearing, write to us on WhatsApp with the part number or model you are looking for. We will reply shortly with the quote and the technical information you need. MR Accesorios Industriales, with more than 80 years in the market, supports Argentine industry with products and specialized advice.

The spherical roller bearing is a component designed to support high radial loads and axial loads in both directions, with self-aligning capability. Its design with two rows of spherical rollers and a spherical outer raceway allows it to compensate for angular misalignment between shaft and housing, even under shaft deflection conditions. It is used in applications where perfect alignment is not guaranteed, such as belt drives, industrial fans, conveyor belts and mining equipment. MR Accesorios Industriales supplies the FAG brand, a benchmark in precision bearings.

The BE-XL series designation is interpreted as follows: the numeric prefix (for example, 22238, 22240, 22332) indicates the size and dimension series; the BE suffix corresponds to a design with a machined brass cage, roller-guided, and the XL suffix identifies the X-life generation, with optimized surfaces that increase load capacity and service life. Examples 22238-BE-XL and 22336-BE-XL show how these elements combine: the base number defines the bore diameter and series, while BE-XL specifies design and performance characteristics.

These bearings are used in a wide variety of industries in Argentina. They are common in mining equipment, cement plants, aggregate processing plants, mills, mixers, industrial fans, conveyor belts and agricultural machinery. Their ability to withstand heavy loads and misalignment makes them suitable for applications where the shaft may deflect or where mounting is not perfectly aligned. They are also used in belt drives and in support rollers of rotary kilns.

To correctly select a spherical roller bearing, take into account the radial and axial load it must support, the rotational speed, the type of lubrication (grease or oil) and the environmental conditions. Sealing is essential: if there is dust or moisture, choose variants with seals or protective plates. Internal clearance must be suitable for the application; excessive clearance can generate vibrations and insufficient clearance can cause overheating. During mounting, ensure correct alignment and use suitable tools to avoid damage to the rings and rollers. Lubrication must be the one specified by the manufacturer and renewed according to the maintenance plan.

Regarding equivalences and interchangeability, spherical roller bearings from different manufacturers can be interchanged if the main dimensions (bore, outer diameter and width) and the design type (cage, sealing, clearance) match. However, not all suffixes are equivalent between brands; for example, the FAG BE-XL suffix may have its counterpart in other nomenclatures, but it is essential to verify the technical specifications. For replacements, it is always advisable to consult a specialist and provide the complete part number of the original bearing.

If you need a quote for FAG BE-XL series spherical roller bearings, write to us on WhatsApp with the part number or model you require. At MR Accesorios Industriales we advise you so you can find the right solution for your application. Send us your inquiry and we will respond shortly.

The FAG NJ series cylindrical roller bearing is a component with high radial load capacity, designed to withstand high loads and considerable speeds. Its design with cylindrical rollers and polyamide cage allows precise operation in demanding industrial applications. It is used in machine tools, pumps, compressors, electric motors and transmission equipment, where reliability and durability are critical. MR Accesorios Industriales supplies this line backed by more than 80 years in the Argentine market.

The NJ series designation is interpreted as follows: the letters NJ indicate that the bearing has two ribs on the inner ring and one on the outer ring, which allows axial displacement in one direction. The number that follows (for example, 202, 203, 204, etc.) indicates the size and load capacity. The suffix E indicates a reinforced design with higher capacity. XL means it incorporates high-performance polyamide cage technology. TVP2 identifies the cage type: glass fiber reinforced polyamide, window, roller guided. Thus, an NJ205-E-XL-TVP2 combines all these characteristics for optimum performance.

These bearings are used in a wide variety of industries in Argentina, such as metalworking, food, chemical, cement and mining. They are common in gearboxes, centrifugal pumps, industrial fans, machine tools and continuous process equipment. Their ability to withstand high radial loads and their rigidity make them suitable for gear transmissions and applications where high precision and durability are required. In the railway and automotive fields they also find application in transmission and rolling components.

To correctly select an NJ bearing, it is essential to consider the radial load, the rotational speed and the environmental conditions. Sealing is a key aspect: if the environment has dust or moisture, it is recommended to choose variants with seals or shields. Lubrication must be adequate, whether with grease or oil, and assembly must guarantee precise alignment to avoid additional loads. Internal clearance must also be verified according to the application. The TVP2 polyamide cage offers good behavior at moderate temperatures and high speed.

Regarding equivalences and interchangeability, FAG NJ series cylindrical roller bearings can be replaced by products from other brands that follow the same dimensional and execution designation. It is important to verify tolerances and internal clearance, as they may vary between manufacturers. The NJ designation is standard in the industry, but suffixes may differ. It is always advisable to consult a specialist before replacing a bearing to ensure full compatibility with the application.

To request a quote for FAG NJ series bearings, contact MR Accesorios Industriales on WhatsApp. Send the complete part number of the product you need and we will reply shortly. We have more than 80 years of experience supplying industrial components in Buenos Aires, Argentina, and we can advise you on selecting the right bearing for your equipment.

The FAG cylindrical roller bearing of the NU-E-XL-TVP2 series is a single-row radial bearing with a polyamide cage and a reinforced capacity design. It is used in applications where radial load is high and speed is also high, such as gearboxes, pumps, electric motors and transmission equipment. Its separable construction facilitates assembly and maintenance. MR Accesorios Industriales supplies this line with technical advice so you can choose the correct part number for your equipment.

The series designation is read in blocks. NU indicates that the outer ring has two ribs and the inner ring has none, which allows axial displacement within the bearing. E indicates the reinforced capacity design, with more rollers or larger diameter. XL identifies the long-life design with improvements in geometry and surface treatment. TVP2 corresponds to the polyamide cage reinforced with glass fiber, roller-guided. Examples such as NU202-E-XL-TVP2 or NU208-E-XL-TVP2 show how the size changes according to the series number.

In Argentine industry, these bearings appear in speed reducers, centrifugal pumps, industrial fans, electric motors and machine tools. They are also found in mining, cement and steel equipment, where radial loads are demanding and high rigidity is required. The NU series is common in fixed supports and in arrangements where the shaft must be able to expand without generating additional stresses.

To select the bearing, take into account the radial load, rotation speed and type of lubrication. The TVP2 polyamide cage is suitable for most applications with moderate temperatures; if the environment exceeds 120 °C, a metal cage should be evaluated. Assembly must be done with suitable tools, without striking the rings, and verify alignment between shaft and housing. Grease or oil lubrication must follow the manufacturer's recommendations for each size.

Cylindrical roller bearings from different brands are interchangeable if the main dimensions and rib design match. When replacing a FAG with another brand, verify that the suffix designation is equivalent, especially regarding the cage and load capacity. Not all suffixes have the same meaning between manufacturers. If you have doubts, consult us with the complete part number and we will help you find the equivalent.

If you need a FAG cylindrical roller bearing of the NU-E-XL-TVP2 series, write to us on WhatsApp with the part number or your equipment model. At MR Accesorios Industriales we respond promptly with the quote and the technical information you need to proceed.

The FAG NUP series cylindrical roller bearing is a single-row bearing with a polyamide cage and a design with two ribs on the inner ring and one on the outer ring. It is used to support high radial loads and high speeds, and allows small angular misalignments. It is a common choice in applications requiring high load capacity and rigidity, such as machine tools, pumps, compressors and power transmission equipment.

The NUP series designation is read as follows: the letters NUP indicate a cylindrical roller bearing with two ribs on the inner ring and one on the outer ring, which allows axial mounting and dismounting. The E suffix indicates an execution with higher load capacity, while XL corresponds to the high-performance polyamide cage and TVP2 identifies the material and design of the cage. For example, NUP203-E-XL-TVP2, NUP204-E-XL-TVP2 and NUP205-E-XL-TVP2 share the same structure and differ in bore diameter.

In Argentine industry, these bearings are found in power transmission equipment, centrifugal pumps, screw compressors, machine tools and gearboxes. They are also used in applications where radial loads are significant and precise axial guidance is needed, such as in milling machine spindles or in rolling mill rolls. Their ability to withstand high speeds makes them suitable for electric motors and industrial fans.

To select the right bearing, take into account the radial load, the rotational speed and the type of lubrication. The NUP series supports grease or oil lubrication; in applications with high temperatures or speeds, oil is recommended. Mounting must be carried out with suitable tools to avoid damaging the rollers and the cage. It is important to verify the alignment of the shaft and the housing, and to use seals or radial shaft seals if the environment has dust or moisture.

FAG cylindrical roller bearings are interchangeable with those of other brands that follow the same dimensional designation, such as SKF, NSK or NTN, as long as tolerances and internal clearance are respected. When requesting a quote, it is advisable to indicate the full part number and, if possible, the operating conditions so we can advise you on the best option. MR Accesorios Industriales sells the FAG brand as part of its bearings range.

If you need a FAG NUP series cylindrical roller bearing, write to us on WhatsApp with the part number or model you are looking for. At MR Accesorios Industriales we will reply shortly with the quote and the technical information you need for your application.

FAG tapered roller bearings are components designed to support combined radial and axial loads. Their cone and cup geometry allows linear contact that distributes the load better and tolerates slight misalignment. They are used in applications with significant loads and moderate speeds, such as gearboxes, wheel axles and agricultural machinery. MR Accesorios Industriales supplies this line backed by more than 80 years in the industry.

The series designation is read from its basic number and the suffixes that accompany it. In the examples 30202-XL, 30203-XL, 30204-XL, 30205-XL, 30206-XL, 30207-XL, 30208-XL and 30209-XL, the prefix 302 identifies the single-row tapered roller series. The -XL suffix indicates the manufacturer's current design, with improvements in design and materials. The final number (02, 03, 04, etc.) indicates the size within the series, from smallest to largest. Knowing this logic lets you request the exact part number you need.

These bearings are used in industries in Argentina such as food processing, metallurgy, mining and agriculture. They are found in gearboxes, drive shafts, conveyor belt rollers, seeders and harvesters, and in material handling equipment. Their ability to support combined loads makes them suitable for assemblies where the shaft receives radial and axial loads at the same time, which is common in machinery exposed to demanding conditions.

To select correctly, take into account the radial and axial load the bearing must support, the rotation speed and the available space. Mounting requires careful alignment between cone and cup, and a proper fit to achieve the recommended internal clearance. Lubrication must be the one indicated for the type of service, whether grease or oil, and the sealing must protect against dust and moisture. Mounting with the right tools and without impacts prevents premature damage.

As for equivalences, tapered roller bearings are manufactured under international standards that allow brands to be interchanged while keeping the same dimensions and load capacity. When looking for a replacement, verify that the part number and tolerances match the original. If you have doubts, the technical team at MR Accesorios Industriales can advise you to find the right option among the brands it supplies.

To request a quote for the FAG tapered roller bearing you need, send the complete part number by WhatsApp. If you don't have it on hand, send us the shaft dimensions or a photo of the part and we'll help you identify it. We'll reply shortly with the information you need for your application.

FAG tapered roller bearings are components designed to withstand combined radial and axial loads. Their geometry of tapered raceways and rollers allows distributing forces in demanding applications. MR Accesorios Industriales supplies this line for the Argentine market, with technical advice to select the correct part number. If you need a specific size, send us the part number on WhatsApp and we will quote you shortly.

The designation of these bearings combines numbers that indicate dimensions and letters that identify design variants. For example, in 302/32, 303/28 or 329/22, the initial digits indicate the diameter series and contact angle, while the number after the slash corresponds to the bore diameter. In codes such as 30336 or 332/32, the series defines width proportions and load capacity. Get to know the examples in the family to interpret each case: if in doubt, the technical team at MR Accesorios Industriales can help you read the code.

These bearings are used in industries in Argentina such as food, metallurgy, mining and agro-industry. They appear in gearboxes, conveyor belts, mills, pumps, fans and earthmoving machinery. Also in road, port equipment and in the oilseed industry. Their ability to withstand combined loads makes them suitable for assemblies where the shaft works with simultaneous radial and axial forces, something common in power transmissions and support rollers.

To select correctly, take into account the type of load, rotation speed and environmental conditions. Sealing or protection plates prevent the entry of contaminants; in environments with dust or moisture, it is advisable to prioritize variants with protection. Lubrication must be adequate for the working temperature, and mounting requires precise alignment and correct adjustment of axial clearance, since these bearings are usually mounted in pairs. A controlled interference fit and rigorous cleaning of the seat extend service life.

Regarding equivalents, tapered roller bearings are manufactured under international standards that allow interchanging codes between different manufacturers when dimensions and tolerances match. However, it is not enough for the number to be similar: the contact angle, total width and internal design must be verified. Therefore, if you are looking to replace an existing bearing, the safest thing is to send the complete part number and mounting dimensions so that we can offer you the correct alternative.

If you need to request a quote for FAG tapered roller bearings, write to us on WhatsApp with the part number or model you are looking for. At MR Accesorios Industriales we will reply shortly with the technical and commercial information you need to move forward. We can also advise you if you have doubts about the designation or mounting. More than 80 years of experience in the industrial sector back our service.

FAG tapered roller bearings are components designed to withstand combined radial and axial loads. Their cone geometry allows linear contact that distributes stresses better, which is why they are used in applications where power must be transmitted and movement controlled precisely. MR Accesorios Industriales supplies this line as a brand, with more than 80 years of experience in the Argentine industrial market.

The designation of this series is read from the K prefix followed by a number that identifies the assembly. For example, K355-X-352 or K419-414 indicate pairs of cone and cup that are mounted together. In part numbers with a hyphen, the first number usually corresponds to the cone and the second to the cup, but each combination has its own geometry. To choose the correct one, send us the full part number shown on the drawing or on the old part.

These bearings are used in industries such as food, cement, mining, oil and in maintenance workshops. In Argentina they are commonly found in gearboxes, transmission shafts, road machinery, pumping equipment and transport systems. Their ability to work with combined loads makes them suitable for assemblies where radial and axial forces occur simultaneously, which is common in the process industry.

To select a tapered roller bearing, consider radial and axial load, rotation speed and environmental conditions. Mounting requires careful alignment and adjustment of axial or radial clearance depending on the type of arrangement. Lubrication can be with grease or oil, and sealing will depend on environmental contamination. It is important to respect mounting tolerances to avoid premature failures.

Equivalents exist between brands for this type of bearing, but they are not directly interchangeable without verifying dimensions and capacities. Each manufacturer has its own designations and tolerances. If you need to replace a bearing from another brand, the best approach is to compare the main measurements and consult a specialist. At MR Accesorios Industriales we can guide you to find the right option within the FAG line.

If you have the part number of the bearing you need, write to us on WhatsApp and we will quote you shortly. We can also advise you if you are looking for a specific variant within the K series. MR Accesorios Industriales supplies FAG bearings as a brand, with personalized service for the industrial market.

The deep groove ball bearing is the most widely used type of bearing: it supports radial and axial loads in both directions, runs at high speeds and requires little maintenance. It is used in electric motors, pumps, fans, gearboxes and a huge variety of industrial equipment. MR Accesorios Industriales supplies the FAG brand in Buenos Aires, Argentina, with more than 80 years of experience in the field.

The designation of the 60 series is read directly: the first digits indicate the type and the dimension series, and the following ones the size. For example, 6003, 6008 or 6014 correspond to the 60 series, which is characterized by its thin section. The suffixes that may appear after the number (such as 2RS, C3 or ZZ) indicate the type of sealing, the tolerance or the internal clearance, as applicable. If you have any doubts, send us the complete part number and we will verify it.

These bearings are used in electric motors, centrifugal pumps, fans, compressors, conveyors, machine tools and power transmission equipment in general. In Argentina you will find them in food, textile, chemical and cement plants and in the metalworking sector. Their versatility makes them suitable for both light-load assemblies and moderate demands, as long as the correct clearance and sealing are selected.

To choose well, take into account the load, speed, temperature and environment. If there is dust or moisture, a contact seal (2RS) or a metal shield (ZZ) is advisable. If the bearing operates with thermal expansion, it may require C3 clearance. Assembly must be done with suitable tools, without striking the rings, and with correct alignment between shaft and housing. Factory lubrication is usually sufficient for the entire service life in normal applications.

When replacing, interchangeability between brands is common if the main dimensions and the type of execution match. A deep groove ball bearing from another brand with the same basic designation is usually equivalent, but always check the suffixes: a different seal or a different clearance can change performance. At MR Accesorios Industriales we supply FAG as a brand and we can advise you on the right equivalent.

If you need an FAG deep groove ball bearing, send us the part number on WhatsApp. We will quote you shortly and advise you so that you get the option that best suits your equipment. With more than 80 years in the market, at MR Accesorios Industriales we know the applications and can help you resolve your inquiry.

The deep groove ball bearing is the most widely used component for supporting radial and moderate axial loads in rotating equipment. The FAG 2RSR series incorporates contact seals on both sides that retain lubricant and block the entry of dust and moisture. MR Accesorios Industriales supplies this line for plants, workshops and maintenance operations in Buenos Aires, Argentina.

The designation of these bearings combines the series number with the suffix 2RSR. The numeric code, as in 6003-2RSR or 6014-2RSR, identifies the series and size; the higher the number, the larger the bore diameter and load capacity. The suffix 2RSR indicates sealing on both sides, with a contact seal that protects the raceway and the lubricant. This nomenclature makes it easy to recognize the type of closure and order the correct replacement.

They are used in electric motors, centrifugal pumps, fans, conveyors, machine tools and transmission equipment. In Argentine industry they appear in packaging lines, mills, food plants and pumping systems. Their double sealing makes them suitable for environments with dust, chips or moderate moisture, where an open bearing would require frequent lubrication.

To select the bearing, check the shaft diameter, the type of load and the environmental conditions. The 2RSR sealing is suitable when there is contamination; if the requirement is high speed and low friction, consider a variant with less contact. During mounting, correctly align the shaft and the housing, avoid direct blows on the seals and use suitable extraction and insertion tools. The lubrication is retained from the factory; no addition is required.

Deep groove ball bearings with 2RSR sealing are interchangeable between manufacturers that maintain standardized dimensions. When replacing, compare the complete code, the dimensions and the type of sealing. If the original equipment carries a different designation, the numeric code and the closure suffix are usually sufficient to identify an equivalent. If in doubt, consult the technical department.

To request a quote for the FAG 2RSR series bearing you need, send the complete code by WhatsApp to MR Accesorios Industriales. With the model and quantity, the team responds promptly. You can also inquire about other sealing variants or bearings from different brands and series.

FAG 2Z series deep groove ball bearings are single-row ball components with two metal shields, designed to carry moderate radial and axial loads in both directions. They are used in electric motors, fans, pumps, gearboxes and power transmission equipment. MR Accesorios Industriales sells this line, with technical advice to select the correct part number for your application.

The designation of these bearings combines a basic three-digit number that indicates the size and the dimension series, followed by the 2Z suffix. For example, in 608-2Z the 608 defines the bore, outer diameter and width according to the standard, while 2Z indicates that the bearing has two metal shields, one on each side. Other part numbers in the same family, such as 6000-2Z or 6200-2Z, share that logic: the number identifies the size and the suffix the sealing or clearance variants.

In Argentine industry, these bearings appear in low and medium power electric motors, centrifugal fans, centrifugal pumps, conveyor belts, machine tools and packaging equipment. They are also found in automotive applications, such as alternators and tensioners. Their closed construction with metal shields makes them suitable for environments with moderate dust or dirt, where the goal is to retain lubricant without the hermetic sealing of a rubber seal.

To select the correct part number, take into account the shaft diameter, the expected radial and axial loads, and the rotation speed. The 60 series is the lightest section, the 62 series the medium section and the 63 series the highest capacity. The 2Z suffix indicates metal shielding; if the environment has moisture or fine particles, a rubber seal (2RS) may be preferable. Check shaft and housing alignment, and lubricate according to the application. Mounting must be done with suitable tools, without striking directly on the balls.

Deep groove ball bearings are manufactured under international dimension standards, so an equivalent part number from another brand can usually be interchanged dimensionally. However, tolerances, internal clearance and lubricant type can vary between manufacturers. If you need to replace an existing bearing, the safest approach is to compare the complete part number and the service conditions. At MR Accesorios Industriales we can advise you on interchangeability.

If you already have the part number of the bearing you need, write to us on WhatsApp and we will quote you shortly. We can also advise you if you are assembling new equipment or if the original bearing has no visible identification. MR Accesorios Industriales sells FAG bearings, along with a broad line of power transmission and mounting components.

The angular contact bearing is a ball bearing with offset raceways that allow it to support radial and axial loads in one direction. It is used in pairs or in paired arrangements to cover both directions. In Argentina it is found in spindles, pumps, gearboxes and equipment where precision and rigidity are important. MR Accesorios Industriales supplies the FAG brand, with more than 80 years of experience in industrial distribution.

The designation of this series combines a size number with letters that indicate particular features. The suffix B defines the 40° contact angle, which gives it greater axial capacity than a conventional angular contact bearing. XL indicates the optimized design of the cage and materials. TVP corresponds to the glass-fibre reinforced polyamide cage, ball-guided. Thus, a 7004-B-XL-TVP is a bearing of the 70 series, size 04, with B angle, XL design and TVP cage. The examples 7005, 7006, 7200 and 7202 follow the same logic: the 72 series has a larger section than the 70 series.

These bearings are used in machine tool spindles, centrifugal pumps, compressors, precision gearboxes, high-speed fans and transmission equipment. In Argentine industry they appear in food, petrochemical, steel and automotive plants, where high rigidity and combined load capacity are required. They are also used in paired arrangements to support axial loads in both directions, for example in milling machine spindles or in process pump shafts.

To select the correct bearing, radial and axial load, rotational speed and mounting rigidity must be considered. Internal clearance and preload are defined according to the application: a paired arrangement with preload improves precision, but requires careful adjustment. Lubrication can be grease or oil; at high speeds oil and a suitable cooling system are recommended. Sealing will depend on the environment: in the presence of dust or moisture, it is advisable to choose bearings with additional seals or shields. Alignment between supports is critical to avoid parasitic loads.

FAG angular contact bearings can be interchanged with those of other brands that follow the same international designation, such as SKF, NSK or NTN, as long as dimensions, contact angle and clearance match. It is important to verify the cage suffix and the internal design, because they can vary between manufacturers. For replacements, the safest approach is to compare the complete part number and the operating conditions. MR Accesorios Industriales can advise you on the appropriate equivalent according to the equipment and its use.

If you need a FAG angular contact bearing, write to us on WhatsApp with the part number or model you are looking for. We will quote you shortly and help you choose the correct variant for your application. MR Accesorios Industriales, Buenos Aires, Argentina, with more than 80 years supporting industry.

FAG angular contact bearings are ball bearings with offset raceways that support radial and axial loads in a single direction. They are used in pairs or combinations for shafts requiring high precision and rigidity, such as machine tool spindles, pumps and gearboxes. MR Accesorios Industriales sells this line with technical advice so you can choose the correct design for your application.

The designation of this series is read in blocks. The numeric prefix identifies the size: examples 30/5-B-TVH, 30/6-B-TVH, 30/7-B-TVH and 30/8-B-TVH correspond to compact dimensions, while 3000-B-TVH, 3001-B-TVH, 3002-B-TVH and 3003-B-TVH follow the larger diameter series. The letter B indicates a single row angular contact design with a defined contact angle. The TVH suffix indicates that the cage is made of polyamide reinforced with glass fiber, suitable for high speeds and moderate temperatures. Learn more about this nomenclature at MR Accesorios Industriales.

These bearings are used in machine tool spindles, milling heads, centrifugal pumps, compressors, speed reducers and power transmission equipment. In Argentine industry you will find them in metalworking, food, petrochemical and plastics processing plants, where axial rigidity and rotational precision are required. They are also used in electric motors and industrial fans working with combined loads. Their ability to support thrust in one direction makes them ideal for paired arrangements.

To select the correct bearing, take into account the direction of the axial load, the internal clearance and the type of sealing. In paired arrangements, preload and alignment between both bearings define the rigidity of the assembly. Lubrication must be chosen according to speed and working temperature: grease for standard applications or oil for high revolutions. The TVH polyamide cage offers good high-speed behavior, but check compatibility with the lubricant and the environment. Properly fitted mounting prevents premature wear.

FAG angular contact bearings are interchangeable with those of other European and Asian brands that follow the same dimensional and design nomenclature. When requesting a quote, provide the full part number and, if possible, the main dimensions and the cage type. This allows us to offer the exact equivalent. At MR Accesorios Industriales we have experience in bearing selection for different industries and can guide you if you have doubts about the design.

If you need a FAG angular contact bearing, write to us on WhatsApp with the part number or model you are looking for. We will reply shortly with availability and the alternatives that best suit your equipment. We can also advise you on mounting and lubrication so that the bearing works under optimal conditions.

FAG angular contact bearings of the B-XL-JP series are ball bearings with raceways designed to support combined radial and axial loads in a single direction. They are used in applications requiring high precision and rigidity, such as machine tool spindles, pumps, compressors and gearboxes. At MR Accesorios Industriales we carry this FAG line, a brand we sell, and we advise you so you can choose the right bearing for your application.

The designation of this series is read in parts: the basic number indicates the size (for example, 7200, 7201, 7202), and the suffixes B, XL and JP provide information about the design. The letter B corresponds to a 40° contact angle, while XL identifies the execution with higher load capacity and lower friction. The suffix JP refers to a sheet steel cage, window type, ball centered. Thus, a 7205-B-XL-JP is an angular contact bearing with those characteristics.

These bearings are used in industries such as metalworking, food, chemical and petrochemical. In Argentina, they are common in milling machine and CNC lathe spindles, centrifugal pumps, screw compressors, gearboxes and transmission cases. They are also found in mining equipment and in the automotive industry. Their ability to support axial loads in one direction makes them suitable for paired arrangements, where two bearings are combined to absorb forces in both directions.

To select the correct bearing, take into account the radial and axial load it must support, the rotation speed and the environmental conditions. Sealing is key: if there is dust or moisture, choose variants with seals or shields. Lubrication must be suitable for the temperature and speed; in high-speed applications, oil lubrication is recommended. Mounting requires precise alignment and, in many cases, controlled axial adjustment. Incorrect mounting can reduce the bearing's service life.

Regarding equivalents, angular contact bearings from other brands can be interchanged if dimensions and contact angle match. However, tolerances and load capacities may vary between manufacturers. Therefore, always verify the complete designation and consult with us if you need to replace an existing bearing. At MR Accesorios Industriales we can help you find the right equivalent within our product line.

If you need a quote for a FAG angular contact bearing of the B-XL-JP series, write to us via WhatsApp with the complete part number (for example, 7206-B-XL-JP) or the dimensions you require. We will reply shortly with availability and the alternatives that best suit your equipment. We can also advise you on mounting and lubrication so that your application runs reliably.

The thrust ball bearing is a single-row component that supports predominantly axial loads in one direction, with separable shaft and housing washers. It is used where the load pushes in the shaft direction and speeds are moderate, such as transmission columns, rotary tables and lifting mechanisms. At MR Accesorios Industriales we supply the FAG line with the full designation so that the quote is precise.

The designation of this family reads as a series of five digits starting with 511 followed by the size: 51100, 51101, 51102, 51103, 51104, 51105, 51106 and 51107 are the smallest steps of the series. The final number indicates the size of the assembly, not a standalone measurement. When the code includes suffixes, it is best to read them with the manufacturer's product page: they change design details, not the concept of the product.

In Argentine industry these thrust bearings appear in presses, screw lifts, cutting tables, milling heads and material handling equipment. They are also found in gearboxes and machine tools where the load is thrust and there is no relevant radial component. In those assemblies, the bearing works supported on flat surfaces and requires that the housing and shaft be well seated.

To select, start from the axial load the assembly will support and the direction of that load: the single-row thrust ball bearing takes thrust in one direction. Check the permissible rotational speed, because these bearings are not intended for high speeds. During installation, take care with the perpendicularity of the support faces and the alignment between shaft and housing; a tilted face concentrates the load on a few balls. Lubrication must reach the raceway and be renewed according to the duty cycle.

Between brands, interchangeability is resolved by designation and mounting dimensions: a thrust bearing of the 511 series from another manufacturer with the same code usually shares diameters and height. Still, before replacing, compare the suffix and the design, because two bearings with the same number may differ in cage or treatment. If in doubt, send us the original code and the code of the equipment where it is mounted.

If you need a FAG thrust ball bearing for equipment in operation, send the code via WhatsApp to MR Accesorios Industriales. With the full designation and, if possible, a photo of the assembly, we will quote promptly and guide you on the correct variant.

The FAG MP series thrust ball bearing is a component designed to support predominantly axial loads in one direction. Its design with balls and flat rings suits applications requiring high load capacity and rigidity. MR Accesorios Industriales carries this series as part of its bearing line, with more than 80 years of experience in the Argentine industrial market.

The MP series designation consists of a five-digit number indicating size and load capacity, followed by the MP suffix. For example, 51130-MP, 51132-MP and 51134-MP correspond to single-direction thrust ball bearings. The MP suffix indicates a machined brass cage, suitable for demanding applications. This nomenclature allows quick identification of size and main characteristics.

These bearings are used in applications where axial loads are predominant, such as gearboxes, pumps, compressors, machine tools and lifting equipment. In Argentine industry, they are common in the metalworking, food and petrochemical sectors. Their ability to support unidirectional loads makes them ideal for assemblies requiring precision and axial rigidity.

To select the right thrust ball bearing, take into account the axial load, rotational speed and environmental conditions. It is essential to verify ring alignment and ensure proper lubrication, whether with grease or oil. Mounting must be done with appropriate tools to avoid damaging the raceways. The MP brass cage offers good strength and heat dissipation.

Regarding equivalences, thrust ball bearings from other brands may have similar designations, but it is important to verify dimensions and tolerances. Interchangeability between brands is not always direct; consulting a specialist is recommended. MR Accesorios Industriales can advise you to find the best option for your application.

If you need a quote for an FAG MP series thrust ball bearing, send the part number via WhatsApp to MR Accesorios Industriales. Our technical team will respond promptly with the information needed for your requirement.

FAG TVH series self-aligning ball bearings are single-row self-aligning bearings with two raceways in the outer ring and a spherical surface that compensates for angular misalignment between shaft and housing. They are used in applications where perfect alignment cannot be guaranteed, such as belt drives, fans or agricultural equipment. MR Accesorios Industriales supplies this line with technical advice so you can choose the correct part number.

The TVH series designation is read step by step. The initial numbers identify the size and series: for example, 108-TVH, 126-TVH or 1200-TVH correspond to self-aligning ball bearings of different dimensions. The TVH suffix indicates that the cage is made of glass fiber reinforced polyamide, suitable for moderate temperatures and high speed. In four-digit codes, such as 1200-TVH or 1202-TVH, the first two digits indicate the series and the last two the bore diameter. To correctly interpret each code, it is advisable to consult the dimension table.

These bearings are used in equipment where the shaft may flex or become slightly misaligned: belt and chain drives, fans, centrifugal pumps, textile machines, agricultural equipment and conveyors. In Argentine industry they appear in food processing plants, cement plants, paper mills and the metalworking sector. Their self-aligning capability reduces stress on the shaft and housing, which extends the service life of the assembly. They are a frequent choice when the mounting does not allow precise alignment or when the structure is flexible.

To select the correct bearing, take into account the shaft diameter, radial and axial loads, and rotational speed. The TVH series with polyamide cage is suitable for applications with adequate lubrication and temperatures that do not exceed the material limits. During mounting, verify that the housing and shaft are clean and free of burrs; self-alignment does not correct excessive concentricity errors. Lubrication must be as specified by the manufacturer and sealing will depend on the environment: in the presence of dust or moisture, it is advisable to evaluate sealed variants.

Regarding equivalents, self-aligning ball bearings are manufactured under international standards that allow part numbers to be interchanged between brands, but each manufacturer may have its own suffixes for cage, clearance or sealing. The FAG TVH series may have equivalents in other brands with different designations; it is always advisable to verify dimensions and tolerances before replacing. MR Accesorios Industriales supplies FAG as a brand and can advise you on interchangeability without compromising equipment performance.

If you need an FAG TVH series self-aligning ball bearing, send us the complete part number or the shaft and housing dimensions via WhatsApp. At MR Accesorios Industriales we advise you so you receive the correct part promptly. We can also quote other variants of the FAG line if your application requires sealing, special clearance or high-temperature materials. Write to us and we will reply with the technical information you need.

The FAG self-aligning ball bearing is a self-aligning bearing with two rows of balls, designed to accommodate angular misalignment between shaft and housing. Its spherical outer raceway allows the inner ring to tilt without losing load capacity, which simplifies mounting and absorbs alignment errors. It is used in applications where the shaft can flex or the support is not perfectly rigid. MR Accesorios Industriales supplies this line with technical advice so you can choose the correct part number.

The designation of this series reads as follows: the basic number indicates the size, the letter K indicates that the bore is tapered (mounting on a tapered shaft), TVH identifies the polyamide cage reinforced with fiberglass, and C3 the increased internal radial clearance. For example, 1204-K-TVH-C3 corresponds to a bearing of series 12 with tapered bore, TVH cage and C3 clearance. The examples 1205-K-TVH-C3, 1206-K-TVH-C3 and 1207-K-TVH-C3 follow the same logic. Knowing these suffixes allows you to request the exact part number your equipment needs.

In Argentine industry, these bearings appear in belt conveyors, textile machines, bottling equipment, fans and mixers. They are also found on long transmission shafts, where shaft flex requires self-alignment. With two rows of balls, they support moderate radial and axial loads in both directions. They are a common option in food, chemical and process plants, where cleanliness and robust mounting are critical.

To select the correct bearing, take into account the bore type: the series with K is mounted on a tapered shaft, generally with an adapter sleeve, which facilitates adjustment of the radial clearance. The TVH cage is made of polyamide, suitable for moderate temperatures and standard lubrication. The suffix C3 indicates a greater internal clearance than normal, recommended when there is interference fit or thermal gradients. Check the initial alignment and choose the lubricant according to the service conditions.

Self-aligning ball bearings are interchangeable between manufacturers if the main dimensions, bore type and clearance match. A part number with suffix K and C3 from another brand can replace the FAG one if it maintains those characteristics. However, tolerances and cage materials may vary, so it is advisable to confirm the equivalence with a specialist. At MR Accesorios Industriales we help you validate interchangeability before purchasing.

If you already have the part number or model of your bearing, write to us on WhatsApp and we will quote you shortly. At MR Accesorios Industriales we supply the FAG brand and can guide you on the variant that best suits your application. Send us the equipment data and we will reply with the available option.

FAG self-aligning ball bearings are self-aligning bearings with two rows of balls and a spherical raceway in the outer ring. This geometry allows them to compensate for angular misalignment of the shaft relative to the housing, something a deep groove ball bearing cannot accommodate. They are used in equipment where perfect alignment is not guaranteed or where the shaft flexes under load. MR Accesorios Industriales sells them in Buenos Aires, Argentina, with more than 80 years of experience in the industrial sector.

The designation of this series is read as a size number followed by the suffix -M. In the series examples, such as 1219-M, 1220-M or 1230-M, the number increases with the bearing size and the M indicates the solid brass cage, which is the standard design of this line. The number is not a diameter or a direct measurement: it is the size code that must be cross-referenced with a table to determine the dimensions. Therefore, to request a quote, the most practical approach is to send the complete part number as it appears on the drawing or on the old bearing.

These bearings appear in industrial fans, centrifugal pumps, conveyors, mixers and transmission equipment where the shaft may become misaligned due to mounting, flexing or thermal expansion. In Argentine plants they are found in process lines, air handling equipment and continuous motion machinery. The self-aligning capability reduces parasitic stresses on the shaft and on the support, and simplifies mounting when the housing is not perfectly concentric.

To select a self-aligning ball bearing, take into account the radial and axial load it will support, the rotation speed and the degree of misalignment the equipment needs to compensate for. Internal clearance and cage type influence high-speed behavior and lubrication. During mounting, take care with the cleanliness of the housing and shaft, verify that the fit is correct and lubricate with the amount and type of grease or oil appropriate for the operating conditions.

Self-aligning ball bearings from different brands with equivalent designations and dimensions are available on the market. Interchangeability depends on matching main dimensions, cage type and internal clearance. When the part number of one brand does not exactly match that of another, it is advisable to compare the dimension table and not rely solely on the number. If you have doubts, send us the original part number and the housing dimensions.

If you need to replace a self-aligning ball bearing, write to us on WhatsApp with the part number engraved on the bearing or with the shaft and housing dimensions. At MR Accesorios Industriales we respond shortly with the corresponding alternative. You can also ask us about other lines of bearings, housings and mounting accessories that we sell.

FAG spherical roller thrust bearings are components designed to withstand very high axial loads while at the same time allowing a certain misalignment between the shaft and the housing. Their design with spherical rollers and spherical seating raceway makes them suitable for applications where loads are heavy and alignment conditions are not perfect. They are used in large industrial equipment, such as presses, cranes, mills and mining machines, among others.

The designation of this series is read as follows: the base number, for example 292/500, indicates the size and series; the suffix E1 corresponds to an execution with machined brass cage and rollers guided by the raceway, and MB identifies the solid brass cage. Thus, a part number such as 292/530-E1-MB combines size 530 with the E1 execution and the MB cage. It is important to respect this nomenclature when requesting a quote, since each suffix defines specific design features.

In Argentine industry, these bearings are used in applications where axial loads are considerable and alignment movements are unavoidable. They are found in rolling mill tables, rotary kilns, vertical mills, hydraulic presses and high-capacity lifting equipment. They are also present in machines for the cement, mining and steel industries, where robustness and load capacity are critical factors for production continuity.

To correctly select a spherical roller thrust bearing, the magnitude and direction of the axial load, the rotational speed and the environmental conditions must be considered. It is essential to verify alignment during mounting, since although the design allows misalignment, it must remain within the permissible limits. Proper lubrication, with grease or oil depending on the application, extends service life. Axial clearance must also be checked and uniform support on the contact surfaces ensured.

Regarding equivalences and interchangeability, spherical roller thrust bearings from different brands may differ in dimensions and capacities. Therefore, when replacing a component, it is essential to verify the main dimensions and the load conditions. It is not enough for the part number to be similar; it must be confirmed that the bearing meets the requirements of the application. If you have doubts, consult us with the original part number and we will advise you.

To request a quote for FAG spherical roller thrust bearings, write to us on WhatsApp with the complete part number you need. At MR Accesorios Industriales we reply promptly with the technical and commercial information. If you cannot find the model in the listing, send us the part number or designation and we will handle it for you.

FAG spherical roller thrust bearings are components designed to support very high axial loads and, at the same time, allow slight angular misalignment between the shaft and the housing. Their design with spherical rollers and spherical raceway makes them suitable for applications where loads are fundamentally axial and mounting conditions are not perfect. They are used in heavy machinery, lifting and transmission equipment, and in general in any system requiring high axial load capacity with some tolerance to misalignment.

The designation of this series is read from the basic number, which indicates the size and load capacity. For example, in 29317-E1-XL, the prefix 293 corresponds to the spherical roller thrust bearing series; the number 17 is related to the shaft diameter. The suffix E1 identifies an execution with optimized rollers and cage, and XL indicates the X-life design, which offers greater load capacity and service life. Other examples such as 29318-E1-XL or 29320-E1-XL follow the same logic, varying the size according to the needs of each application.

In Argentine industry, these bearings are used in mining equipment, cement plants, steel mills, overhead cranes, presses, mills and large machines. They also appear in marine applications and in the oil industry, where axial loads are considerable and shafts may present small deflections. Their ability to support combined loads, although predominantly axial, makes them versatile in assemblies where perfect alignment cannot be guaranteed.

To correctly select a spherical roller thrust bearing, consider the magnitude and direction of the load, rotation speed and environmental conditions. It is important to verify sealing: these bearings are usually open, so they require adequate lubrication and protection against contaminants. Mounting must ensure that support surfaces are parallel and that the permissible misalignment is not exceeded. Lubrication can be with grease or oil, depending on the application, and it is essential to maintain a stable lubricant film.

Regarding equivalents and interchangeability, spherical roller thrust bearings from different brands can be interchanged if the main dimensions and load capacity match. However, it is advisable to verify tolerances and internal design, as they may vary between manufacturers. Suffixes such as E1 or XL are specific to FAG and do not necessarily have a direct equivalent in other brands. It is always advisable to consult a specialist before replacing one bearing with another from a different manufacturer.

If you need an FAG spherical roller thrust bearing, at MR Accesorios Industriales we advise you so you choose the correct option. Send us the part number or model you need on WhatsApp and we will quote you shortly. With more than 80 years of experience in the field, we are here to help you find the right solution for your equipment.

FAG spherical roller thrust bearings are thrust units designed to withstand very high axial loads while allowing a certain angular misalignment between shaft and housing. They are used in applications where the load is predominantly axial and the rigidity of the assembly does not require precision bearings. MR Accesorios Industriales supplies this brand line for plants and workshops in Argentina.

The designation of this series is read in blocks. The base number, as in 293/500, indicates the bearing size: the numeric suffix after the slash corresponds to the bore diameter in millimeters. The E1 group identifies the execution with optimized rollers and cage. The letters XL indicate the quality and tolerance treatment according to the brand's standard, and MB indicates the machined brass cage, outer ring guided. Thus, a code such as 293/630-E1-XL-MB combines size, execution, quality and cage type.

These bearings are used in equipment where the axial load is dominant and deflections or misalignments occur: presses, extruders, rolling mill tables, large cranes, vertical mills, high-flow pumps and vertical shaft gearboxes. In Argentine industry they are found in steelmaking, cement, mining, power generation and continuous process plants. Also in marine applications and lifting equipment where thrust is high and speed is moderate.

To select correctly, you must start from the working axial load, the rotational speed and the permissible degree of misalignment. Mounting requires that the shaft and housing rings be well supported and that lubrication reaches the contact zone; in applications with dust or humidity, additional sealing or a lubricant with greater consistency should be evaluated. Initial alignment and available axial clearance determine service life, so it is advisable to follow the manufacturer's instructions for fitting and commissioning.

Regarding equivalences, spherical roller thrust bearings are identified by their numeric designation and by the execution and cage suffixes. Different brands may offer products with equivalent standardized dimensions, but the internal suffixes do not always match. Therefore, to replace a bearing it is advisable to compare bore diameter, outer diameter, height and cage type, and not rely only on the code. If you have doubts, send us the complete code and we will help you identify the right option.

If you need a quote for an FAG spherical roller thrust bearing, write to us on WhatsApp with the code or model you are looking for. At MR Accesorios Industriales we reply promptly with the commercial and technical information you need for your equipment.

FAG C series toroidal roller bearings are high-capacity radial bearings designed to withstand very high radial loads and tilting moments. Their compact, self-aligning design makes them suitable for demanding applications where space is limited and rigidity is required. MR Accesorios Industriales carries this line as part of its industrial bearing offering, with technical advice to select the right execution.

The C series designation is read in blocks: the letter C identifies the toroidal roller family; the number that follows — as in C30/500 — indicates the outside diameter in millimeters (500 mm in this case). The suffixes XL, K and M provide key information: XL indicates the X-life design with longer service life, K indicates the tapered bore (mounting on an adapter sleeve or tapered shaft) and M corresponds to the machined brass cage. Thus, a C31/530-XL-K-M combines these features for an outside diameter of 530 mm.

These bearings are used in continuous process industries where loads are high and speeds are moderate. In Argentina they are common in steel mills, cement plants, pulp plants, mining and flour mills. They also appear in large gearboxes, presses, cranes and material handling equipment. Their ability to withstand high radial loads and some misalignment makes them suitable for long shafts or shafts subject to bending.

To select correctly, consider radial load, speed, type of lubrication and mounting. The K execution with tapered bore facilitates mounting with an adapter sleeve and allows the internal clearance to be adjusted. Sealing can be open or with side plates depending on the environment. Lubrication can be grease or oil, and in critical applications monitoring temperature and vibration is recommended. Shaft and support alignment is essential to avoid parasitic stresses.

As for equivalents, FAG C series toroidal roller bearings can be interchanged with products from other brands that follow the same dimensional and execution nomenclature. It is important to verify tolerances, internal clearance and lubrication conditions before replacing one bearing with another. For safe interchangeability, it is advisable to consult equivalence tables or seek advice from a specialist.

If you need a FAG C series toroidal roller bearing, write to us on WhatsApp with the full part number or the dimensions of your application. At MR Accesorios Industriales we help you identify the correct execution and request a quote promptly.

Toroidal roller bearings are high-capacity radial bearings designed to withstand heavy loads and compensate for misalignment. Their roller and raceway geometry ensures stable operation in demanding applications. At MR Accesorios Industriales we sell the FAG line with designations such as C30/500-XL-M or C31/530-XL-M. If you need to identify the correct code for your equipment, write to us on WhatsApp and we will advise you.

The designation of this series combines the letter C with a number indicating the dimension series and a suffix identifying execution variants. For example, in C30/500-XL-M, the C corresponds to the toroidal roller family, 30 is the dimension series, 500 the bore diameter in millimeters, XL the longer-life execution and M the brass cage. In C31/530-XL-M, the 31 indicates a series with higher load capacity. Knowing these components lets you read the full code and order the exact replacement.

These bearings are used in equipment with significant radial loads and shafts that may flex, such as gearboxes, paper machines, cranes, mills and industrial drives. In the Argentine market, FAG toroidal roller bearings appear in mining, steel, cement and materials handling applications, where robustness and the ability to compensate for misalignment are critical to avoid unplanned downtime.

To select the right bearing, take into account the radial and axial load, rotation speed, type of lubrication and required sealing. The C30 series is usually used in arrangements with predominantly radial load, while the C31 series offers higher capacity. Installation requires careful alignment and proper lubrication; the M brass cage provides resistance under severe conditions. Always check the internal clearance and the fit on the shaft and in the housing.

FAG toroidal roller bearings can be interchanged with equivalent products from other brands that follow the same dimensional designation, but tolerances and capacities may vary. Therefore, when requesting a quote, it is important to provide the full code and the operating conditions. At MR Accesorios Industriales we can guide you on interchangeability.

If you need a quote for FAG toroidal roller bearings, send us the code on WhatsApp. We will reply shortly with the information you need to move forward.

FAG toroidal roller bearings are radial bearings with high load capacity, designed for machines where load demands and precision are critical. Their design with crowned rollers and toroidal raceways allows them to withstand very high radial loads and moments, with good rigidity. MR Accesorios Industriales supplies this line for industrial applications in Buenos Aires, Argentina, and helps you identify the correct code for your equipment.

The designation of these bearings is read in blocks. The initial letter C identifies the toroidal roller family. The number that follows indicates the dimension series: for example, in C30/750-XL-M1B the 30 corresponds to a series and 750 to the bore diameter in millimeters; in C31/560-XL-M1B, the series is 31 and the bore is 560 mm. The suffix XL indicates the high-performance design, and M1B the machined brass cage type. In C3132-XL-M1B, the block 3132 combines series and size. Recognizing these blocks allows you to order the replacement with the complete code.

These bearings are used in applications where radial load is high and space is limited: gearboxes and reducers, paper and pulp machines, mining equipment, steel industry, mills, presses and continuous process machinery. In Argentina, you find them in cement plants, oilseed processing plants, petrochemical plants and the metalworking sector. Their ability to withstand combined loads and moments makes them suitable for shafts with significant overhangs or where other bearings do not perform.

To select the correct bearing, take into account the radial and axial load, rotational speed and environmental conditions. Sealing or protective plates are chosen according to contamination and available lubrication. The M1B machined brass cage is suitable for high demands. During mounting, verify the alignment of the supports and the internal clearance; correct lubrication and proper shaft and housing fits extend service life. If the equipment operates with vibrations, check the clearance and the condition of the raceways.

Regarding equivalences, toroidal roller bearings are identified by their complete designation, which may vary between manufacturers. There is no automatic conversion between codes from different brands: the correct approach is to compare main dimensions, load capacity and cage type. If you need to replace an existing bearing, the safest option is to send the code engraved on the product or the shaft and housing measurements. MR Accesorios Industriales can help you interpret the designation and find the right reference.

If you already have the code or model of the bearing you need, write to us on WhatsApp and we will quote you promptly. We can also advise you if you are building a spare parts list for maintenance. At MR Accesorios Industriales we work with leading brands and give you a clear technical answer so your equipment keeps running.