Angular contact ball bearing FAG 3004-B-2RS-TVH

FAG 3004-B-2RS-TVH is a angular contact ball bearing reference, within Bearings. Request a quote for 3004-B-2RS-TVH via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

FAG angular contact bearings are ball bearings with offset raceways that allow absorbing combined radial and axial loads in one direction. The series with suffix B and 2RS sealing is used in applications requiring rigidity and protection against contaminants, such as pumps, gearboxes, compressors and transmission equipment. MR Accesorios Industriales supplies this line as an official brand and advises you to choose the correct part number for your equipment.

The designation of these bearings is read in blocks. The initial numbers, as in 3000-B-2RS-TVH or 3007-B-2RS-TVH, indicate the size and dimensional series. The letter B corresponds to an angular contact design with modified contact angle, common in this family. The suffix 2RS indicates sealing on both sides, and TVH identifies a synthetic material cage guided by the balls. With this data you can locate the exact variant within the catalog.

In Argentine industry these bearings appear in centrifugal pumps, gearboxes, screw compressors, fans and process equipment. They are also found in machine tools and transmission systems where there are axial loads in one direction and a rigid support is needed. Being sealed, they are suitable for environments with dust or moderate humidity, provided the working temperature is compatible with the sealing.

To select well, take into account the direction of the axial load: this type of bearing works in one direction only, so it is usually mounted in opposed pairs or combined with another support. The 2RS sealing is already lubricated from the factory and does not require additional maintenance in most cases. During mounting, take care with alignment and avoid knocks on the edges, because poor seating shortens service life. If the equipment works with vibration, check the internal clearance and the fit in the housing.

When replacing, interchangeability between brands is defined by the complete designation: bore diameter, dimensional series, contact angle and type of sealing. A part number with B and 2RS is not equivalent to one without sealing or with another design letter. If the original bearing has no visible brand, it is advisable to measure and compare the designation with the manufacturer's catalog. MR Accesorios Industriales can help you validate the equivalence before quoting.

If you already have the bearing part number or the equipment model, send it via WhatsApp to MR Accesorios Industriales and we will quote you promptly. You can also inquire about other variants of the same family or equivalent bearings from other brands we supply.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.