Speedi-Sleeve wear sleeves

The Speedi-Sleeve wear sleeve is a thin-walled stainless steel sleeve that is mounted on the shaft to rebuild the surface where the seal lip rests. It is used when the seal has worn a groove and the shaft no longer ensures sealing, without disassembling or replacing the shaft. It has a mounting flange that is removed once installed.

SKF part numbers are numeric: 99049, 99050, 99052, 99055, 99058, and 99059 have no prefixes, and each number corresponds to a shaft diameter. Therefore, the data to choose it is the shaft measurement in the sealing area, taken at the groove, and the width of the seal that will rest on the sleeve.

It is applied in pumps, electric motors, gearboxes, transmissions, rollers, and process machinery where the shaft cannot be easily changed. Before mounting, check the shaft condition: if there are burrs, scoring, or deep wear, it is advisable to dress the surface. The sleeve covers the groove and gives the seal a smooth, uniform surface.

In this subcategory we work with SKF. Send us the sleeve part number or the shaft diameter measured with a caliper and a photo of the seal and shaft via WhatsApp or email, and we will quote it promptly.