SNR UCFL212-39 flange bearing 2 holes

SNR UCFL212-39 is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for UCFL212-39 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The UCFL housing is a mounted bearing unit with a two-bolt flange, designed to secure transmission shafts to flat structures. The flange is bolted to the machine and the insert bearing, already mounted in the housing, receives the shaft. It is a compact solution with simple alignment for equipment where the assembly must be firm and maintenance quick.

The UCFL designation is read in parts: UCFL identifies the two-bolt flange housing with insert bearing, and the number that follows indicates the shaft size. That is why UCFL204 and UCFL205 are units of different sizes, and the hyphenated suffixes, such as UCFL204-12 or UCFL205-16, correspond to inch shaft diameter variants within the same family. With the full part number, the unit your equipment needs is identified without ambiguity.

These housings are used in conveyors, belts, elevators, mixers, fans, pumps and process lines. In food, chemical, textile and aggregate processing plants, the two-bolt flange allows mounting on sheet metal or structure without machining the housing. MR Accesorios Industriales sells this SNR line for replacement and projects in Buenos Aires and the rest of Argentina.

To choose correctly, check the shaft diameter, the bolt hole spacing of the flange and the mounting position. The insert bearing usually comes with sealing that retains lubricant and blocks dust; check that the sealing is suitable for the environment. During assembly, rest the flange perfectly flat, tighten the screws in a cross pattern and verify that the shaft turns freely, without stress. Correct lubrication and careful alignment extend the life of the assembly.

Units of this type are interchangeable between manufacturers when the shaft size, the flange bolt spacing and the housing outside diameter match. If you bring the part number from another brand, we will tell you the compatible equivalent. We can also identify an unidentified part from the shaft and flange dimensions. Interchangeability is resolved by dimensions, not only by the part number abbreviation.

If you need to replace a UCFL housing or build a series for a piece of equipment, send us the part number or the shaft size via WhatsApp. At MR Accesorios Industriales we quote the exact unit and respond promptly. With more than 80 years in the field, we support both one-off replacements and the supply of complete lines.