Y-bearing (insert bearing) SKF YHB 205-014-2LS8W

SKF YHB 205-014-2LS8W is a y-bearing (insert bearing) reference, within Bearings. Request a quote for YHB 205-014-2LS8W via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The Y-bearing is an insert with an extended inner ring and set screws, designed to be mounted on shafts and housed in split or pillow block housings. The SKF YHB series is used in equipment that needs to support radial loads with moderate misalignment and good retention. MR Accesorios Industriales sells this line as an official brand, with advice to choose the correct variant according to the equipment and the working environment.

The YHB designation reads in blocks: Y indicates that it is a Y-bearing, HB identifies the execution series, and the suffixes that follow clarify the sealing and the particular features of the insert. In the example YHB 205-014-2LS8W, the number 205-014 defines the shaft diameter and the locking variant, while 2LS8 indicates double LS-type sealing and W an additional design feature. Knowing these suffixes avoids confusion when replacing a Y-bearing in machines that are already in service.

These inserts are found in belt conveyors, bucket elevators, mixers, screens and process equipment in food, chemical and aggregate plants. In Argentina they are common in packaging lines, mills and material handling systems where the shaft rotates at moderate speeds and the environment has dust or moisture. The combination of sealing and set screw locking allows them to be mounted on unmachined shafts and to withstand continuous operation with spaced maintenance.

To select correctly, check the shaft diameter, the type of load and the environmental conditions. The LS seal protects against dust and splashes, but if there is pressure washing or immersion, a variant with greater sealing is advisable. During mounting, verify that the shaft is clean and free of burrs, tighten the set screws with the proper wrench and check housing alignment. Correct lubrication and adequate internal clearance extend the insert's life and prevent premature failures.

Regarding interchangeability, Y-bearings from different brands usually share main dimensions, but the sealing, locking and tolerance suffixes vary between manufacturers. Matching the shaft diameter is not enough: the total width, the position of the set screws and the sealing type must be verified. If in doubt, compare the complete designation and consult the supplier before replacing so as not to compromise the equipment's operation.

If you need to replace a Y-bearing from the YHB series, send the complete code by WhatsApp to MR Accesorios Industriales. With the code and a photo of the mounting, we help you confirm the variant and quote the part that best suits your equipment.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.