SKF YAR 207-2F/AG y-bearing (insert bearing)
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF YAR 207-2F/AG is a reference of y-bearing (insert bearing), within Bearings. Request a quote for YAR 207-2F/AG via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF YAR series Y-bearing is an insert with an extended inner ring and set screw locking, designed to be mounted in split or pillow block housings. It is used in equipment that requires a simple, robust and easy-to-install bearing unit, such as conveyors, fans or agricultural machinery. Its design compensates for small misalignments and simplifies maintenance.
The designation YAR …F/AG is read as follows: YAR identifies the series of inserts with extended inner ring and set screw locking; the number that follows (204, 205, etc.) indicates the size, correlative with the shaft diameter.
These bearings are used in a wide variety of industrial applications in Argentina: conveyor belts, bucket elevators, mixers, fans, pumps, equipment for the food, textile, wood and agricultural industries. They are common in machines that operate in environments with dust, humidity or moderate temperatures, where a reliable, low-maintenance bearing unit is required.
To select the correct insert, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The -2F seal protects against contaminants and retains grease; check that the housing is compatible with the YAR series. During installation, ensure proper alignment and tighten the set screws onto the shaft with the recommended torque. Life-long or periodic lubrication will depend on the application and the speed.
As for equivalences, SKF YAR inserts can be interchanged with Y-bearings from other brands that follow the same dimensional standard. Always check the shaft and housing dimensions before replacing. The YAR series is compatible with split and pillow block housings that meet the standard dimensions. If you have doubts, ask us with the exact code and we will advise you.
To request a quote for your SKF YAR …F/AG Y-bearing, send us the complete code by WhatsApp to MR Accesorios Industriales. We will reply with the information you need for your equipment.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm the dimensions and version against the manufacturer's data sheet.
Frequently Asked Questions
- What does the -2F suffix mean on a YAR bearing?
- The -2F suffix indicates that the bearing has a double labyrinth seal, which protects against the entry of contaminants and lubricant loss. It is a common configuration in applications with dust or humidity.
- How is a YAR insert mounted in a housing?
- The insert is placed in the housing and fixed to the shaft by means of set screws. It is important to align correctly and tighten the screws with the recommended torque to prevent slipping.
- Can I replace an SKF YAR bearing with another brand?
- Yes, as long as the dimensions and the locking type match. YAR inserts follow dimensional standards that allow interchangeability between brands. Check the shaft and housing dimensions.