SKF WSTUC 30M-TPZM y-bearing unit

SKF WSTUC 30M-TPZM is a reference of y-bearing unit, within Bearing housings. Request a quote for WSTUC 30M-TPZM via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The Y-housing with SKF insert bearing is an assembled unit that combines a housing unit with an insert bearing, ready to mount on shafts and structures. It is used to guide and support rotating shafts in equipment where a compact and easily aligned solution is required. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, and advises you to choose the correct code according to your application.

The WSTUC …M-TPZM designation is read in parts: WSTUC identifies the series of the Y-housing with insert bearing, the intermediate M indicates the system for fixing the insert to the shaft —generally a set screw on the inner ring— and TPZM indicates sealing and lubrication variants specific to the series. The examples WSTUC 25M-TPZM and WSTUC 30M-TPZM show that the central number refers to the shaft diameter for which the unit is made. To request a quote, send us the complete code as it appears on your equipment or drawing.

These housings appear in belt conveyors, bucket elevators, mixers, screens and packaging lines. In agriculture, they are seen in seeders and harvesters; in food and beverage plants, on transmission shafts and rollers; in the wood and ceramics industry, in equipment with dusty environments. Their mounting format with two holes or a flat base simplifies installation on folded sheet metal or welded structures, something common in equipment manufactured or repaired in the country.

To select the unit, take into account the shaft diameter, the type of load —radial, axial or combined— and the environmental conditions. The TPZM sealing usually includes contact seals that protect against dust and moisture; if the equipment works with frequent washdowns, it is advisable to verify the degree of protection. The lubrication of the insert can be permanent or relubricable depending on the design. During mounting, ensure that the base rests well and that the shaft is aligned to avoid stresses on the insert. Controlled tightening of the fixing screws prevents the inner ring from turning on the shaft.

When replacing, the codes of Y-housings with insert bearing can vary between manufacturers, although the main dimensions usually remain within the same series. Do not assume that a code from another brand is identical: always compare the shaft diameter, the hole spacing and the type of fixing. At MR Accesorios Industriales we can guide you on options that correspond in the brands we sell, without that implying an automatic equivalence. Dimensional verification with a drawing or sample is the safest route.

If you already have the code WSTUC 25M-TPZM, WSTUC 30M-TPZM or any other reference of this family, send it to us via WhatsApp along with a photo of the housing and the shaft measurements. At MR Accesorios Industriales we will reply with the quote and help you confirm that the designation matches what you need.