Y-bearing unit SKF TU 504 M

SKF TU 504 M is a y-bearing unit reference, within Bearing housings. Request a quote for TU 504 M via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF Y-bearing housed unit is an assembled unit that combines a cast iron housing with an insert ball bearing, ready to mount on rotating shafts. It is used to support moderate radial and axial loads in transmission equipment, and its self-aligning design compensates for small mounting errors. It is a practical solution for replacing worn housings or for building new equipment, with the advantage that the unit comes pre-lubricated and sealed from the factory.

The designation TU … M is read as a category of Y-bearing housed units. The letters TU identify the housing type, the number that follows indicates the size of the insert bearing and the final letter M indicates a construction variant, normally associated with the housing material or the sealing type. For example, the TU 504 M carries an insert whose universal code is T 204; the TU 505 M corresponds to the T 205; and the TU 506 M to the T 206. That correspondence with the universal T code allows the insert to be identified directly.

In Argentine industry, these housings appear in belt conveyors, bucket elevators, mixers, mills, centrifugal pumps and process equipment in food, chemical and aggregate processing plants. They are also found in agricultural machinery, such as seeders and harvesters, and in ventilation and extraction systems. Their compact format and the possibility of mounting in different positions make them versatile for shafts that rotate at moderate speeds and require robust, easy-to-maintain support.

To select the right housing, take into account the shaft diameter, the expected radial and axial load, and the environmental conditions. Check the sealing type: there are versions with single or double lip seals, and with additional protection against dust and water. Lubrication comes from the factory, but it is advisable to check the condition of the insert and the housing before mounting. Ensure adequate alignment between housings and avoid impacts on the insert during mounting, as they can damage the raceways and shorten service life.

SKF Y-bearing housed units are interchangeable with those of other brands that follow the universal T nomenclature for the insert. When requesting a quote, the safest option is to provide the complete housing part number (for example, TU 504 M) or the universal insert code (T 204), because this avoids confusion between sealing or material variants. If you do not have the part number, you can send the shaft measurements and a photo of the housing so that we can identify it.

To move forward with the quote, send the part number on WhatsApp to MR Accesorios Industriales. Our technical team helps you confirm the designation and choose the right variant for your application. With more than 80 years in the field, at MR Accesorios Industriales we know the equipment and the demands of Argentine industry.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.