Y-bearing unit SKF TU 25 TF

SKF TU 25 TF is a y-bearing unit reference, within Bearing housings. Request a quote for TU 25 TF via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF Y-bearing insert housed unit is a compact unit that combines a cast iron or pressed steel housing with an insert ball bearing, already lubricated and sealed. It is used to support rotating shafts in equipment where simple alignment and quick mounting are required. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, with more than 80 years of experience in power transmission.

The designation TU …. TF is read as a category of Y-bearing insert housed units. The letters TU identify the housing type, while the number that follows indicates the nominal shaft diameter in inches or millimeters, as applicable. The suffix TF indicates a design variant, normally associated with the sealing type or the housing material. For example, TU 1. TF corresponds to a 1 inch shaft, TU 1.1/2 TF to 1 1/2 inches and TU 2. TF to 2 inches. In the metric series, designations such as TU 20 TF, TU 25 TF, TU 30 TF, TU 35 TF and TU 40 TF appear, referring to diameters from 20 to 40 mm. Each associated universal code, such as UCT 205-16, UCT 208-24 or UCT 211-32, allows the complete unit to be identified for replacement.

These housed units are used in a wide variety of industrial applications in Argentina: belt conveyors, bucket elevators, mixers, mills, fans, centrifugal pumps and process equipment in food, chemical and aggregate processing plants. Their self-aligning design and the possibility of mounting in different positions make them suitable for shafts that do not require extreme precision but do require reliability and ease of maintenance. In the agro-industrial field, they are found in seeders, harvesters and grain handling equipment.

To correctly select a Y-bearing insert housed unit, take into account the shaft diameter, the load type (radial, axial or combined), the environmental conditions and the fastening method. Sealing is critical: in dusty or humid environments, it is advisable to choose seals with greater protection. Lifetime lubrication is common in these units, but in severe applications relubrication may be required. Mounting must ensure adequate alignment and correct tightening of the insert fastening screws to the shaft. Check the axial and radial clearance according to the manufacturer's tolerances.

As for equivalences and interchangeability, universal codes such as UCT 205-16 make comparison between different brands easier. However, not all brands maintain exactly the same dimensions or load capacities, so it is advisable to verify the data sheet before replacing a unit. The SKF TU series may have equivalents in other brands, but the tolerances and housing materials may vary. Whenever possible, replace the complete unit to ensure a correct fit between housing and insert.

If you need to request a quote for an SKF Y-bearing insert housed unit, send the complete part number via WhatsApp to MR Accesorios Industriales. With the universal code or the TU designation we can identify the exact unit and advise you on the best option for your application.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.