SKF TU 1. TF y-bearing unit

SKF TU 1. TF is a reference of y-bearing unit, within Bearing housings. Request a quote for TU 1. TF via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The SKF Y-bearing insert bearing housing is a compact unit that combines a cast iron or stamped steel housing with an insert ball bearing, already lubricated and sealed. It is used to support rotating shafts in equipment where simple alignment and quick mounting are required. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, in power transmission.

The designation TU …. TF is read as a category of Y-bearing insert bearing housings. The letters TU identify the housing type, while the number that follows indicates the nominal shaft diameter in inches or millimeters, as applicable. The suffix TF indicates a construction variant, normally associated with the sealing type or the housing material. For example, TU 1. TF corresponds to a 1-inch shaft, TU 1.1/2 TF to 1 1/2 inches and TU 2. TF to 2 inches. In the metric series, designations such as TU 20 TF, TU 25 TF, TU 30 TF, TU 35 TF and TU 40 TF appear, referring to diameters from 20 to 40 mm.

These housings are used in a wide variety of industrial applications in Argentina: belt conveyors, bucket elevators, mixers, mills, fans, centrifugal pumps and process equipment in food, chemical and aggregate processing plants. Their self-aligning design and the possibility of mounting in different positions make them suitable for shafts that do not require extreme precision but do require reliability and ease of maintenance. In the agro-industrial field, they are found in seeders, harvesters and grain handling equipment.

To correctly select a Y-bearing insert bearing housing, take into account the shaft diameter, the type of load (radial, axial or combined), the environmental conditions and the mounting method. Sealing is critical: in dusty or humid environments, it is advisable to choose seals with greater protection. Lifetime lubrication is common in these units, but in severe applications relubrication may be required. Mounting must ensure adequate alignment and correct tightening of the insert locking screws to the shaft. Check axial and radial clearance according to the manufacturer's tolerances.

As for equivalents and interchangeability, universal codes such as UCT 205-16 make comparison between different brands easier. However, not all brands maintain exactly the same dimensions or load capacities, so it is advisable to verify the technical data sheet before replacing a unit. The SKF TU series may have equivalents in other brands, but tolerances and housing materials may vary. Whenever possible, replace the complete unit to ensure a correct fit between housing and insert.

If you need to request a quote for an SKF Y-bearing insert bearing housing, send the complete code via WhatsApp to MR Accesorios Industriales. With the universal code or the TU designation we can identify the exact unit and advise you on the best option for your application.