Housing covers and accessories SKF TSO 230

SKF TSO 230 is a housing covers and accessories reference, within Bearing housings. Request a quote for TSO 230 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

SKF TSO end covers are closure components for split bearing housings. They are fitted at the ends of the housing to retain lubricant, prevent the ingress of dust, water or particles, and protect the sealing area. Their numerical designation identifies the size compatible with each housing. MR Accesorios Industriales supplies this line as part of its range of accessories for mounting and maintaining bearing systems in Buenos Aires, Argentina.

The TSO designation is read as a category of end covers for split housings, followed by a three-digit number that indicates the housing size. For example, TSO 218, TSO 220 and TSO 228 correspond to housings of different dimensions; higher numbers, such as TSO 244 or TSO 517, refer to larger housings. The numerical code does not indicate the shaft diameter on its own: it must be cross-referenced with the housing size to select the correct end cover.

These end covers are used in equipment with split housings: pumps, fans, conveyors, mixers, mills and process machinery. In food, cement, mining and aggregate processing plants, where dust and moisture attack bearings, a well-selected end cover extends the life of the assembly. They are also replaced during preventive maintenance when the original end cover is deformed, rusted or has a worn sealing lip.

To select the end cover, first check the housing code and the housing size. Inspect the condition of the mounting groove and the type of fixing: some end covers are screwed on, others are press-fit. Alignment with the shaft and the peripheral sealing are critical: a poorly seated end cover lets contaminants through. If the equipment operates with high vibration or temperature, it is advisable to check the material and the sealing lip before requesting a quote.

SKF TSO end covers can be interchanged with those of other split housing manufacturers, but the equivalence is not automatic: the housing size, outer diameter, fixing system and type of sealing must be compared. It is not enough for the number to match. At MR Accesorios Industriales we help you cross-reference the code of your current housing with the compatible end cover.

If you have the end cover or housing code, send it by WhatsApp to MR Accesorios Industriales and we will quote you. You can also ask about end covers for housings of other brands or about complete mounting accessory sets. With more than 80 years in the industry, at MR we know the usual cross-references and guide you so you don't buy an end cover that doesn't fit.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.