Y-bearing unit SKF SYWK 25 YTH

SKF SYWK 25 YTH is a y-bearing unit reference, within Bearing housings. Request a quote for SYWK 25 YTH via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF SYWK YTH housing is an assembly consisting of a plummer block housing and an insert bearing with set screw fastening. It is used to mount rotating shafts on fixed structures, especially in equipment requiring a compact, easy-to-install unit. MR Accesorios Industriales supplies this line as part of its range of bearing housings, with technical advice to choose the right size according to shaft diameter and operating conditions.

The SYWK YTH designation is read as follows: SYWK identifies the plummer block housing series with insert bearing and set screw fastening; the number that follows indicates the shaft diameter in inches or millimeters as applicable. For example, SYWK 1. YTH corresponds to a 1 inch shaft, while SYWK 20 YTH, SYWK 25 YTH, SYWK 30 YTH, SYWK 35 YTH and SYWK 40 YTH cover 20, 25, 30, 35 and 40 mm shafts. The suffix YTH distinguishes the insert and seal type. Recognize the series by its letters and ask about the exact size you need.

These housings are used in belt conveyors, bucket elevators, mixers, mills, conveyor belts and process equipment in the food, chemical, cement and aggregate industries. In Argentina they are common in animal feed plants, aggregate processing plants and packaging lines, where a robust unit with simple maintenance is required. Their plummer block design allows mounting on steel or concrete structures with two bolts, facilitating initial alignment and replacement.

To select the housing, take into account the shaft diameter, the expected radial and axial load, and environmental conditions. The YTH insert seal protects against dust and moisture, but if there are frequent washdowns or exposure to chemical agents, additional seals should be evaluated. Mounting must be done on a flat, rigid surface, with the fastening screws tightened to the recommended torque. Lubrication is permanent in most inserts, although in severe applications it may require periodic relubrication. Verify shaft alignment with the housing to avoid parasitic loads.

Regarding equivalents, SKF SYWK YTH housings can be interchanged with units from other brands that follow the same dimensional standard, such as the SKF SY series or equivalents from manufacturers such as NSK, NTN or FAG, provided the shaft diameter, base height and hole spacing match. Not all brands use the same nomenclature, so it is essential to compare the actual dimensions of the housing and the insert before replacing. MR Accesorios Industriales can help you identify the correct equivalent.

If you need a SYWK YTH housing for your equipment, send us the complete part number and quantity by WhatsApp. At MR Accesorios Industriales we advise you so you choose the right size and avoid unnecessary downtime. We can also quote the insert separately if you already have the housing in good condition. Write to us and we will reply shortly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.