Y-bearing unit SKF SYFJ 504

SKF SYFJ 504 is a y-bearing unit reference, within Bearing housings. Request a quote for SYFJ 504 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF SYFJ Y-bearing unit is an assembled unit that combines a cast iron housing with an insert ball bearing, ready to mount on shafts and bolt to the structure. It is used to guide rotating shafts in equipment where a compact, self-aligning unit with simple maintenance is needed. MR Accesorios Industriales supplies this line as an official brand, backed by more than 80 years in the industrial sector.

The SYFJ designation identifies a square flange housing of the Y family. The letters indicate the housing type and the insert's fixing system; the number that follows (504, 505, 509, etc.) is associated with the shaft diameter for which the unit is intended, according to the manufacturer's table. To choose the correct part number, you must cross-reference that number with the actual shaft size and the type of fixing the insert accepts. At MR we help you interpret the nomenclature if you send us the complete part number.

These housings appear in belt conveyors, packaging lines, mixers, fans, centrifugal pumps and transmission lines in food, chemical and materials plants. In Argentina they are widely seen in material handling equipment and agricultural machinery, where the cast iron housing withstands dust and vibration. The square flange allows bolting them to sheet metal or structural profile with four screws, which simplifies assembly and field replacement.

To select the housing, check that the shaft diameter matches the part number and that the expected radial and axial load is within what the insert accepts. The insert bearing's sealing protects against dust and splashes; if the environment is very dirty, additional protection is advisable. During mounting, seat the flange flat, tighten the screws in a cross pattern and check that the shaft turns without effort. The insert's lubrication is usually permanent, but under severe conditions it may require replenishment.

Y-bearing units are interchangeable between manufacturers that follow the same mounting standard and shaft diameter. When replacing a unit, compare the shaft diameter, the flange hole pitch and the insert's fixing type (set screw, eccentric or adapter). Having a similar part number is not enough: real interchangeability depends on those dimensions. If you have doubts, send us a photo of the part and the shaft measurements.

If you need the SYFJ housing for a running unit, write to us on WhatsApp with the complete part number (for example, SYFJ 504, SYFJ 505 or SYFJ 509) and the shaft measurements. At MR Accesorios Industriales we will quote you and advise you so that you get the correct unit. We can also look at alternatives within the same family if the exact part number is not available.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.