SKF SY 30 TF y-bearing unit

SKF SY 30 TF is a reference of y-bearing unit, within Bearing housings. Request a quote for SY 30 TF via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The SKF SY bearing housing with insert bearing is an assembled unit that combines a cast iron housing unit with a Y-series insert bearing. It is used to support rotating shafts in power transmission equipment, especially when simple mounting and self-alignment are required. MR Accesorios Industriales sells this line for industrial applications in Argentina.

The designation SY …. TF reads as follows: SY identifies the split pillow block housing with insert bearing; the number that follows indicates the shaft diameter, in inches or millimeters depending on the case; and the suffix TF indicates the system for securing the insert to the shaft, which in this series is by means of set screws. For example, SY 1. TF corresponds to a 1 inch shaft, while SY 1.1/2 TF is for 1 1/2 inches. The suffix does not change the housing dimensions, but it does change the bearing adjustment method.

These housings are used in belt conveyors, bucket elevators, mixers, mills, screens and process equipment in food, chemical and aggregate plants. They also appear in agricultural machinery, centrifugal pumps and industrial fans. In Argentina they are common in grain plants, meat processing plants and animal feed factories, where quick mounting and simple replacement of the insert are key to avoiding production stoppages.

To choose the correct housing, check the shaft diameter and the type of securing your equipment needs. The insert sealing can be simple or with an additional seal for dusty or humid environments. The internal clearance of the insert bearing is greater than that of a conventional deep groove ball bearing, which allows for some misalignment. During mounting, make sure the base sits properly and that the set screws are tightened with the correct wrench. Lubrication is done through a grease fitting and the manufacturer's frequency should be followed.

As for equivalents, SKF SY housings are interchangeable with other brands that use the same mounting standard and shaft diameter, such as the SY series from NTN, FY from NSK or UC from Timken, as long as the main dimensions and the securing type match. Interchangeability is not always complete: check tolerances and sealing before replacing.

If you need a quote for an SKF SY bearing housing with insert bearing, write to us on WhatsApp and send us the complete part number, for example SY 1.1/4 TF. At MR Accesorios Industriales we advise you so you choose the correct variant for your application. We know the needs of Argentine industry and give you a technical and direct answer.