SKF SNT 528 H bearing housings

SKF SNT 528 H is a reference of bearing housings, within Bearing housings. Request a quote for SNT 528 H via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The SNT H housing from SKF is a split gray cast iron housing for mounting bearings with an adapter sleeve. It is used in equipment with shafts rotating at moderate speeds and combined loads, where robust support and the ability to disassemble without moving the machine are required. MR Accesorios Industriales sells this line, with technical advice to choose the correct variant according to the bearing and the shaft.

The SNT H designation reads as follows: SNT identifies the SKF split housing series; the number that follows, as in SNT 528 H, indicates the size and the bearing it houses; the final letter H indicates that the housing is used with an adapter sleeve. That combination allows mounting bearings with a tapered bore on cylindrical shafts, without machining shoulders or threads. For each size there is a variant with and without H; the choice depends on the type of fit you need on the shaft.

These housings appear in belt conveyors, bucket elevators, mills, mixers, centrifugal pumps and industrial fans. In Argentina they are seen in food plants, cement plants, tanneries and mining facilities, where the environment has dust, humidity or variable temperature. Gray cast iron resists moderate corrosion well and the split design makes it easy to replace the bearing without completely disassembling the shaft, something key in production lines that cannot stop for long.

To select the housing, start from the bearing you are going to mount: the SNT H is designed for bearings with a tapered bore and adapter sleeve. Check the shaft diameter and the radial and axial load that the assembly will support. The housing sealing and bearing lubrication must be chosen according to the environment: consistent grease for dirty areas, oil for high speeds. Alignment between housings is critical; angular misalignment accelerates wear. Follow the sleeve tightening instructions and check the internal clearance after mounting.

As for equivalents, the SNT H housings from SKF are interchangeable with similar lines from other European brands, such as SNH or SN, as long as the housing dimensions and the bearing type match. There is no universal table: each manufacturer has its own suffixes for seals, covers and sleeves. So, if you are going to replace an existing housing, send us the complete code engraved on the part and the shaft dimensions. That way we confirm compatibility without risk of error.

MR Accesorios Industriales sells the SNT H housings from SKF. If you need to replace a housing or build a complete assembly with bearing and sleeve, send us the code via WhatsApp. We will send you the quote. We know the typical applications of each series and help you avoid unnecessary downtime.