SKF PWM 9010580 friction bushing
- Brand
- SKF
- Category
- Bushings and sleeves
- Subcategory
- Friction bushings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF PWM 9010580 is a reference of friction bushing, within Bushings and sleeves. Request a quote for PWM 9010580 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
SKF PWM series friction bushings are thin-walled self-lubricating bushings that allow oscillating or rotating movements with low friction and no maintenance. They are used to replace bearings at hard-to-reach points or where periodic lubrication is not possible. MR Accesorios Industriales sells this line for the Argentine market.
The PWM series designation is interpreted as a numeric code that indicates the main dimensions. For example, PWM 202415 corresponds to a bushing with a 20 mm inner diameter, 24 mm outer diameter and 15 mm width. Likewise, PWM 505860 has a 50 mm inner diameter, 58 mm outer diameter and 60 mm width. The numeric suffixes allow you to quickly identify the size without needing to consult additional tables.
These bushings are used in industries such as food, textile, packaging and machine tools. They are common in transmission shafts, joints, robot arms and equipment where lubrication is critical or simply cannot be performed. They are also used in applications with moderate radial loads and controlled sliding speeds.
To select the right bushing, take into account the shaft diameter, the radial load and the type of movement. Verify that the shaft surface has the appropriate hardness and roughness. During installation, ensure correct alignment and avoid impacts that deform the bushing. Initial lubrication may be necessary depending on the material and operating conditions.
SKF PWM bushings can be interchanged with equivalent products from other brands, as long as the dimensions and material match. If you have doubts, consult our technical team to validate the equivalence.
To request a quote or ask about an SKF PWM bushing, send the exact part number on WhatsApp to MR Accesorios Industriales. We advise you so that you choose the correct option for your application.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm the dimensions and version against the manufacturer's data sheet.
Frequently Asked Questions
- What does the PWM designation mean in SKF bushings?
- The PWM series identifies SKF friction bushings. The number that follows indicates the dimensions in millimeters: inner diameter, outer diameter and width. For example, PWM 202415 corresponds to 20 mm inner diameter, 24 mm outer diameter and 15 mm width.
- Do these bushings need lubrication?
- SKF PWM bushings are self-lubricating, so they generally do not require additional lubrication. However, in demanding applications an initial lubrication can be applied to improve performance and service life.
- How do I know if a PWM bushing is compatible with my machine?
- Verify the housing and shaft dimensions, the radial load and the type of movement. If they match the bushing specifications, it is compatible. If in doubt, consult MR Accesorios Industriales by sending the part number on WhatsApp.