SKF PHC 180SHH-1DRPX362LK-SV roller chain
- Brand
- SKF
- Category
- Power transmission
- Subcategory
- Roller chains
- Size
- ASA 180
- Series
- PHC
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF PHC 180SHH-1DRPX362LK-SV is a reference of roller chain, within Power transmission. Request a quote for PHC 180SHH-1DRPX362LK-SV via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF PHC SHH series roller chain is a long-pitch chain with large-diameter rollers, designed for demanding power transmissions where strength and durability are prioritized over speed. It is used in industrial applications that require hauling heavy loads, such as conveyors, elevators and heavy machinery. MR Accesorios Industriales sells this line, with technical advice to select the right chain for each drive.
The PHC series designation is read from left to right: PHC identifies the SKF roller chain line; the number that follows, such as 160 or 180, indicates the pitch in eighths of an inch (160 = 2", 180 = 2 1/4"). The SHH suffix indicates a long-pitch construction with larger-diameter rollers, which allows transmitting more load at the same pitch. Then, 1DRPX indicates single-strand chain with special rollers, and the associated number (305, 362) identifies the roller diameter. The LK-SV suffix refers to a specific type of joint or chain end.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm the dimensions and version against the manufacturer's data sheet.
Frequently Asked Questions
- What does the SHH suffix mean on an SKF PHC chain?
- SHH indicates a long-pitch construction with larger-diameter rollers. This allows transmitting higher loads at the same pitch, making it ideal for low-speed, high-demand applications.
- How do I identify the pitch of a PHC 160 or 180 chain?
- The number after PHC indicates the pitch in eighths of an inch: 160 corresponds to 2 inches and 180 to 2 1/4 inches. This measurement is key for compatibility with sprockets.
- Can I replace a chain from another brand with an SKF PHC chain?
- Yes, as long as the pitch, roller diameter and joint type match according to ISO or ANSI standards. Contact us with the original part number to verify the exact equivalent.