Product page
Y-bearing unit SKF PF 62
- Manufacturer Part Number
- PF 62
- Brand
- SKFOfficial brand
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
Other brands in this family
- EMMAR
- FAG
- NTN
- TIMKEN
Ask us about alternatives. Equivalence is verified for each reference and application.
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF PF 62 is a y-bearing unit reference, within Bearing housings. Request a quote for PF 62 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The SKF PF series Y-bearing housed unit is an assembled unit that combines an insert bearing with a Y-shaped cast iron housing, ready to mount on shafts and fix to the structure. It is used to guide and support rotating shafts in equipment where simple alignment and permanent lubrication are required. MR Accesorios Industriales supplies this line with advice to select the correct size for your application.
The PF designation identifies the SKF series of Y-bearing housed units. The number that follows indicates the main size of the unit, which in the available examples ranges from PF 40 to PF 90. Each size corresponds to a specific shaft diameter and an associated load capacity. To choose the correct housing, take into account the complete part number and the shaft diameter where it is mounted. If you need to confirm the equivalence with your current equipment, send us the part number on WhatsApp and we will help you.
These housings are used in a wide variety of industries in Argentina. You will find them in belt conveyors, packaging lines, machines for the food industry, chemical industry equipment and agricultural applications. They are also common in fans, mixers and transmission systems where a robust and easy-to-mount housing is required. Their Y-shaped design allows them to be fixed with two bolts, which simplifies installation and replacement in the plant.
To select the right housing, consider the shaft diameter, radial and axial loads, and environmental conditions. Check the sealing type of the insert bearing: there are versions with single or double lip seals, and with or without an additional retainer. Lubrication may be permanent or require periodic greasing depending on the model. During mounting, ensure correct alignment between the housings and avoid striking the bearing. The fixing must be firm but without deforming the housing.
SKF Y-bearing housed units are interchangeable with those of other brands in terms of main dimensions, as long as the series and size match. However, tolerances and materials may vary between manufacturers. We recommend verifying the complete part number and critical dimensions before replacing a component. At MR Accesorios Industriales we can guide you on compatibility and the alternatives available for your equipment.
If you need a quote for an SKF PF series Y-bearing housed unit, send us the complete part number on WhatsApp. At MR Accesorios Industriales we advise you so that you choose the correct size and we send you the quote with no obligation. We can also help you with other transmission and mounting components you need for your maintenance.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- How do I identify the size of the PF housing I need?
- The size comes from the shaft diameter where it is mounted. In the PF series, the number that follows the letters indicates that size. Verify the diameter with a caliper and compare it with the designation. If you have doubts, send us the part number and measurements on WhatsApp.
- What is the difference between a Y-bearing housing and an insert bearing unit?
- The Y-bearing housing is the housing that seats the insert bearing. The insert bearing unit is the bearing with its spherical outer ring and locking mechanisms. The assembled unit is mounted directly on the shaft and fixed to the structure.
- Are SKF PF housings compatible with other brands?
- In general, the main dimensions are interchangeable between brands for the same series and size. However, there may be differences in tolerances, seals and materials. Before replacing, verify the part number and consult us to confirm compatibility.