Product page
Y-bearing (insert bearing) SKF PER.UC205AT-A
- Manufacturer Part Number
- PER.UC205AT-A
- Brand
- SKFOfficial brand
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
Other brands in this family
- FAG
- NTN
- TIMKEN
Ask us about alternatives. Equivalence is verified for each reference and application.
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF PER.UC205AT-A is a y-bearing (insert bearing) reference, within Bearings. Request a quote for PER.UC205AT-A via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The SKF Y-bearing PER.UC AT-A is an insert with extended inner ring and set screws, designed to be mounted in split plummer block or pillow block housings. It is used in equipment with shafts rotating at moderate speeds that require simple and reliable fixing. Its sealed construction protects it from dust and moisture, extending service life in demanding industrial environments.
The designation PER.UC AT-A reads as follows: PER indicates the insert series for split housings; UC defines the set screw fixing type on the inner ring; AT indicates reinforced sealing for environments with dust or moisture; and -A corresponds to an internal execution variant. Examples PER.UC204AT-A, PER.UC205AT-A, PER.UC210AT-A, PER.UC211AT-A, PER.UC212AT-A and PER.UC216AT-A show how the number changes according to shaft diameter: the higher the number, the larger the diameter. To choose, identify the shaft diameter and the compatible housing.
These bearings are used in conveyors, grain elevators, mixers, mills, centrifugal pumps and process equipment in food, chemical and aggregate plants. In Argentina, they are common in the oilseed, meatpacking and waste treatment industries. Their sealed design makes them suitable for areas with dust, moisture or frequent washdowns, where reducing maintenance downtime is sought.
To select, verify that the shaft diameter matches the series number and that the housing accepts the spherical outer ring. During mounting, clean the shaft and apply a thin layer of lubricant. Tighten the set screws alternately and with the appropriate wrench to avoid deforming the ring. Check housing alignment and axial clearance. If the equipment operates with high vibration, periodically check the set screw tightness and the condition of the seals.
Regarding equivalences, Y-bearings with set screw fixing from different brands are usually interchangeable if the main dimensions and sealing type match. However, always verify tolerances and housing design before replacing. For safe interchangeability, compare the outer ring dimensions and overall width. MR Accesorios Industriales sells SKF as an official brand and can advise you on the appropriate equivalent.
If you need to replace an SKF Y-bearing PER.UC AT-A, send us the complete code via WhatsApp. At MR Accesorios Industriales we help you identify the correct part and request a quote. We can also guide you on the housing and mounting accessories. Write to us and we will respond promptly.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- How do I know which Y-bearing number I need?
- The number relates to the shaft diameter. Measure the shaft with a caliper and compare with the series table. If you have the housing, verify that the outer ring matches. If in doubt, send us the measurements via WhatsApp and we will help you identify the code.
- Does this bearing come with set screws?
- Yes, the PER.UC AT-A series includes set screws on the inner ring to fix the bearing to the shaft. They are tightened with an Allen wrench and allow quick mounting. It is important to tighten them alternately and with the appropriate torque to avoid deformation.
- Can it be used in dusty or humid environments?
- Yes, the AT suffix indicates reinforced sealing that protects against dust and splashes. Still, in very aggressive environments it is advisable to periodically check the seals and relubricate if possible. For applications with frequent washdowns, ask us about variants with greater protection.