SKF PER.UC205-16-D y-bearing (insert bearing)
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF PER.UC205-16-D is a reference of y-bearing (insert bearing), within Bearings. Request a quote for PER.UC205-16-D via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF PER.UC-D Y-bearing is an insert with set screws for mounting in split plummer block or pillow block housings. It is used in equipment where the shaft rotates and simple alignment is needed, such as conveyor belts, fans or mixers. Its design allows it to be fixed to the shaft without additional machining and to withstand moderate radial loads. MR Accesorios Industriales sells this line so you have the correct reference for your maintenance.
The PER.UC-D designation is read in parts: PER indicates the insert series with set screws, UC defines the type of fastening by set screws on the inner ring, and D indicates a sealing or design variant. The example PER.UC205-16-D shows the shaft diameter in inches (16/16 = 1 inch) and size 205. To choose, provide the complete code shown on the nameplate or on the housing.
These bearings are used in the food, textile, chemical and transport industries in Argentina. They go in split plummer block, pillow block or flange housings to drive shafts of belts, elevators, agitators and dryers. Their sealing protects them from dust and ambient humidity. Being inserts, they allow replacing only the bearing without changing the housing, which simplifies plant maintenance.
To select, verify the shaft diameter, the type of fastening (set screws or eccentric) and the required sealing according to the environment. During mounting, clean the shaft and the housing, apply the recommended tightening load on the set screws and verify the axial clearance. Factory lubrication is usually sufficient, but under severe conditions it may require replenishment. Align the housing to avoid parasitic loads.
Cross-brand equivalences are handled by dimensions and type of fastening: a UC insert from another brand with the same shaft diameter and size can be interchanged, but verify tolerances and sealing. Not all suffixes match. At MR Accesorios Industriales we advise you to find the equivalent reference.
If you have the code of the Y-bearing or the housing, send it by WhatsApp to MR Accesorios Industriales. With that data we quote the correct part. So your equipment keeps running.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm the dimensions and version against the manufacturer's data sheet.
Frequently Asked Questions
- What does PER.UC-D mean in a Y-bearing?
- PER indicates the insert series with set screws, UC the type of fastening by set screws and D a sealing or design variant. The number that follows, such as 205, defines the size, and the suffix -16 the shaft diameter in inches.
- How do I choose the right Y-bearing for my equipment?
- You need the shaft diameter, the type of fastening (set screws or eccentric) and the working environment to define the sealing. Also verify the housing where it is mounted. With that data we advise you to select the correct reference.
- Can I replace a Y-bearing from another brand with an SKF one?
- Yes, if the main dimensions, shaft diameter and type of fastening match. Equivalences are based on dimensional standards, but seals and tolerances may vary. Consult us with the original code to confirm interchangeability.