SKF PER.HCN308AT-A y-bearing (insert bearing)

SKF PER.HCN308AT-A is a reference of y-bearing (insert bearing), within Bearings. Request a quote for PER.HCN308AT-A via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The SKF PER.HCN308AT-A Y-bearing is an insert with a spherical outer ring and a cylindrical bore, designed to be mounted in split or pillow block housings to form a bearing unit. It is used in equipment where the shaft rotates at moderate speeds and a compact solution with easy alignment and replacement is preferred. MR Accesorios Industriales sells it in Buenos Aires, Argentina.

The designation PER.HCN308AT-A is read in parts: the prefix PER identifies the family of Y-bearings with a spherical outer ring; HCN indicates a cylindrical bore design and construction features specific to this variant; 308 is the series number that defines the bore diameter and main dimensions; AT-A indicates the sealing type and the particularities of the insert. The example PER.HCN308AT-A allows the part to be located by its full code, without ambiguity, when ordering it or comparing it with another brand.

These Y-bearings are used in conveyors, belts, elevators, mixers, fans, pumps and process equipment. In Argentina they appear in food plants, cement plants, tanneries, water treatment plants and packaging lines, where the environment may have dust, humidity or frequent washdowns. Their mounting in split housings makes assembly and replacement easier on equipment with long or hard-to-reach shafts. MR Accesorios Industriales sells them for replacement and projects in Buenos Aires, Argentina.

To select the correct Y-bearing, take into account the shaft diameter, the type of load and the environmental conditions. The sealing must be chosen according to the presence of dust, water or chemical agents; in humid environments additional protection is advisable. Proper lubrication and careful alignment of the housing extend service life. During mounting, check that the shaft and the housing are clean and free of burrs, and that the insert seats correctly in the housing.

Cross-references between brands are handled by dimensions and by code: a Y-bearing from another company with the same bore diameter and a similar design can be interchanged, but it is always advisable to confirm tolerances, sealing and clearance. If you have another brand's code or an unidentified part, write to us on WhatsApp and we will indicate the compatible alternative or quote the exact code you need.

To request a quote for the SKF PER.HCN308AT-A Y-bearing or any other reference in the line, send the code by WhatsApp to MR Accesorios Industriales. We will reply shortly with the commercial and technical information you need for your equipment. We can also advise you if you are looking for a variant with a different type of sealing or a different size within the same family.