SKF PER.HCN308-24A y-bearing (insert bearing)

SKF PER.HCN308-24A is a reference of y-bearing (insert bearing), within Bearings. Request a quote for PER.HCN308-24A via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The SKF PER.HCN Y-bearing is an insert with a spherical outer ring and set screw locking, designed to be mounted in split plummer block or flanged housings. It is used in equipment where the shaft rotates and needs support with flexible alignment, such as conveyor belts, fans or mixers. Its design compensates for minor misalignment and simplifies mounting on solid shafts.

The PER.HCN designation combines the PER prefix, which identifies the series of inserts with a spherical outer ring and screw locking, with the basic number that indicates the shaft diameter. For example, PER.HCN207A corresponds to a 35 mm shaft and PER.HCN308-24A to a 40 mm shaft. The A suffix indicates a construction variant within the series, generally linked to the sealing type or the shape of the inner ring.

These Y-bearings are used in belt conveyors, bucket elevators, mixers, mills, fans and process equipment in the food, chemical, cement and aggregate industries. In Argentina they are common in animal feed plants, meat processing plants and quarries, where the environment usually has dust, humidity or frequent washdowns. Their mounting in split plummer block housings facilitates maintenance and replacement without fully disassembling the shaft.

To select the insert, check the shaft diameter and the type of housing you will use. Set screw locking requires the shaft to have the proper hardness and finish to prevent the screws from slipping. Check the sealing: in dusty or wet environments, additional protection is advisable. Lubrication must be the one indicated by the manufacturer and mounting must ensure the housing is aligned so that the spherical outer ring works without lateral stresses.

When replacing a Y-bearing, compare the main dimensions: bore diameter, outer diameter and width. Series of inserts with a spherical ring are usually interchangeable between brands if those measurements and the locking system match. If another brand's code does not match, write to us with the shaft size and housing dimensions so we can identify the equivalent.

To request a quote for the SKF PER.HCN Y-bearing you need, send the full code by WhatsApp to MR Accesorios Industriales. If you have doubts about the designation, send the shaft diameter and housing dimensions and we will tell you the exact reference. We can also advise you on mounting and the proper lubrication for your application.