Y-bearing (insert bearing) SKF PER.FHR208-24

SKF PER.FHR208-24 is a y-bearing (insert bearing) reference, within Bearings. Request a quote for PER.FHR208-24 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF PER.FHR series Y-bearing is an insert bearing with a spherical outer ring and set screw locking, designed to be mounted in split or pillow block housings. It is used in equipment where alignment is not perfect and a compact, easy-to-replace unit is needed. MR Accesorios Industriales supplies this line with technical advice to choose the correct variant for your application.

The PER.FHR designation is read as a category of SKF Y-bearings with specific characteristics: the abbreviation PER indicates the series, FHR identifies the design with a spherical outer ring and set screw locking. The numbers that follow —205, 206, 207, 208— indicate the bearing size according to the shaft diameter. The suffixes with a hyphen, such as -16, -19, -20, -22 or -24, indicate the bore diameter in inches (for example, 205-16 for 1 inch). Thus, PER.FHR205-16 is a bearing for a 1" shaft, while PER.FHR206-20 corresponds to 1 1/4". Always check the complete part number to avoid confusion.

These bearings are used in a wide variety of industrial equipment in Argentina: belt conveyors, grain elevators, flour mills, balanced feed plants, sand washers, centrifugal pumps and fans. They are also present in the meatpacking industry, in meat processing machines and in chemical industry equipment. Their sealed design makes them suitable for environments with dust, humidity and frequent washdowns, provided the appropriate sealing is chosen.

To select correctly, take into account the shaft diameter, the load type (radial, axial or combined) and the environmental conditions. Sealing is key: Y-bearings come with single or double lip seals, and some with additional protection. Lubrication may be with lithium or synthetic grease, and in many cases the bearing is already factory-lubricated. During mounting, ensure proper alignment of the housing and tighten the set screws with a torque wrench according to specification. Forced mounting can damage the seals and reduce service life.

Regarding equivalences, SKF PER.FHR series Y-bearings can be interchanged with products from other brands that follow the same dimensional standard. However, not all suffixes match: always verify the shaft dimensions, the overall width and the locking type before replacing. MR Accesorios Industriales can advise you on alternatives in its product line, always respecting the original equipment specifications.

If you need a quote for an SKF PER.FHR series Y-bearing, send us the complete part number by WhatsApp. At MR Accesorios Industriales we will reply promptly with supply options. We can also help you identify the correct replacement if you do not have the part number at hand. Write to us and we will advise you.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.