SKF PER.FC209-HX-A y-bearing unit

SKF PER.FC209-HX-A is a reference of y-bearing unit, within Bearing housings. Request a quote for PER.FC209-HX-A via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The SKF Y-bearing unit with insert bearing is an assembled unit that combines an insert bearing with a bearing housing, forming a ready-to-mount unit. It is used to support rotating shafts in equipment where simple mounting and self-alignment are required. MR Accesorios Industriales supplies this line as a brand, with technical advice to select the right configuration according to shaft diameter and load type.

The PER.FC designation identifies the SKF series of Y-bearing units with insert bearing. In the examples PER.FC207-HX-A and PER.FC209-HX-A, the middle digits (207, 209) indicate the insert bearing size, which in turn defines the shaft diameter for which the unit is intended. The HX suffix indicates a specific design variant within the series, while the -A ending distinguishes a particular version of the housing. To correctly interpret each code, check the manufacturer's dimension table or send the complete code to MR.

These units are used in a wide variety of industrial applications in Argentina. They are found in belt conveyors, bucket elevators, mixers, fans, centrifugal pumps and process equipment in food, chemical and aggregate processing plants. They also appear in agricultural machinery, such as seeders and harvesters, and in low and medium power transmission systems. Their compact and self-aligning design makes them suitable for shafts that require tolerance to slight misalignment.

When selecting a Y-bearing unit with insert bearing, take into account the shaft diameter, the load type (radial, axial or combined) and the environmental conditions. Check the sealing: inserts usually come with lip seals or oil seals that protect against dust and moisture. Lubrication may be permanent or require periodic greasing depending on the version. For mounting, ensure a flat, clean surface and follow the manufacturer's instructions for fitting the insert onto the shaft. Correct alignment extends the service life of the unit.

Regarding equivalents and interchangeability, Y-bearing units with insert bearing from different brands may differ in critical dimensions such as center height, distance between mounting holes and type of fixing. Even if a code is similar, they are not always directly interchangeable. Therefore, before replacing a unit, compare the actual dimensions or consult a specialist. MR Accesorios Industriales can help you identify the right alternative within the brands it supplies.

If you need to replace a Y-bearing unit with insert bearing, send the complete product code by WhatsApp to MR Accesorios Industriales. With that information, the technical team can confirm the configuration, verify the SKF line and advise you on the best option for your equipment. You can also ask about other brands and equivalent alternatives.