Product page
Y-bearing (insert bearing) SKF PER.CP211-HT
- Manufacturer Part Number
- PER.CP211-HT
- Brand
- SKFOfficial brand
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
Other brands in this family
- FAG
- NTN
- TIMKEN
Ask us about alternatives. Equivalence is verified for each reference and application.
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF PER.CP211-HT is a y-bearing (insert bearing) reference, within Bearings. Request a quote for PER.CP211-HT via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The SKF PER.CP-HT Y-bearing is an insert with set screw locking, designed to be mounted in split or pillow block housings. Its designation combines the PER series with the CP suffix, which indicates this type of locking, and HT, which denotes a heat treatment for high temperatures. It is used in equipment where the operating temperature exceeds that of a standard bearing, such as ovens, dryers or continuous process lines.
The PER.CP-HT designation reads as follows: PER identifies the insert series with metric dimensions; CP indicates locking by means of set screws on the inner ring; HT indicates that the bearing received a special heat treatment to withstand elevated temperatures. Examples in the series are PER.CP211-HT and PER.CP213-HT, where the numbers 211 and 213 correspond to the insert size. Not all inserts in the series share these letters; therefore it is advisable to verify the complete part number before requesting a quote.
These bearings are used in industries such as food, ceramics, metallurgy and aggregate processing, where equipment operates with heat. They also appear in conveyors, bucket elevators, mixers and industrial fans. In Argentina, they are commonly found in grain drying plants, foundries and production lines that cannot stop due to premature failures. Their ability to withstand high temperatures makes them suitable for demanding environments.
To select the correct insert, take into account the shaft diameter, the type of load and the actual operating temperature. Mounting must be done on a shaft with adequate tolerance and a clean surface; the set screws are tightened with the corresponding wrench. Lubrication must be compatible with the operating temperature, and the housing seal prevents the entry of contaminants. Verify alignment between housings to avoid unforeseen axial loads.
Y-bearings with set screw locking are interchangeable between brands as long as the main dimensions and the type of locking match. However, the HT suffix is not universal: other brands may identify it differently. Therefore, when looking for a replacement, do not rely only on the number; also compare the heat treatment and the service conditions. MR Accesorios Industriales can advise you if you have doubts.
If you need a quote for PER.CP211-HT, PER.CP213-HT or any other insert in the series, send us the complete part number on WhatsApp. At MR Accesorios Industriales we respond promptly with compatible alternatives. We work with in-house manufacturing to give you a technical solution tailored to your equipment.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- What does the HT suffix mean on this bearing?
- The HT suffix indicates that the bearing was subjected to a special heat treatment that allows it to operate at higher temperatures than a conventional Y-bearing. It does not replace the need for adequate high-temperature lubrication.
- How is a Y-bearing with set screw locking mounted?
- The bearing is inserted into the housing and fixed to the shaft by tightening the set screws on the inner ring. It is important to clean the shaft well, verify alignment and apply the recommended torque to prevent slipping.
- Can I replace a PER.CP-HT with another brand?
- Yes, as long as the main dimensions, the type of locking and the temperature conditions match. The HT suffix may have another designation in other brands, so verify that the replacement withstands the same operating temperature.