Y-bearing (insert bearing) SKF PER.205RP8

SKF PER.205RP8 is a y-bearing (insert bearing) reference, within Bearings. Request a quote for PER.205RP8 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF PER RP series Y-bearing is an insert with an extended inner ring and set screw locking system, designed to be mounted in split or pillow block housings. It is used in equipment where the bearing must be fixed to the shaft and housed in a split housing, such as conveyors, mills and mixers. MR Accesorios Industriales carries this line and advises you to choose the correct part number for your application.

The PER RP series designation is read in parts: PER identifies the category of Y-bearings with an extended inner ring and screw locking; RP indicates the sealing type and the insert characteristics. The examples PER.205RP8 and PER.206RP2 show that the central number (205, 206) defines the shaft diameter and the bearing size, while the final suffix (RP8, RP2) distinguishes sealing or design variants. To choose the exact part number, always verify the shaft diameter and the housing type where it is mounted.

These bearings are used in industries such as food, cement, mining and material handling. In Argentina they are common in belt conveyors, bucket elevators, mixers, mills and process equipment that operate with rotating shafts and moderate loads. Their design allows them to be mounted in split plummer block housings, which makes replacement easier without disassembling the whole assembly. They are also used in agricultural machinery and in transmission systems where firm but removable locking is required.

To correctly select a PER RP Y-bearing, take into account the shaft diameter, the load type (radial, axial or combined) and the environmental conditions. The RP seal protects against dust and moisture, but if there is exposure to liquids or fine particles, it is advisable to verify the sealing. During mounting, make sure the shaft is clean and free of burrs, and tighten the set screws with the appropriate wrench to prevent the inner ring from turning on the shaft. Lubrication must be the one specified by the manufacturer and renewed according to the duty cycle.

As for equivalents, Y-bearings from different brands can be interchanged if the main dimensions and locking type match, but not all suffixes mean the same thing. A part number with SKF RP sealing may have an equivalent in another brand with a different designation. Therefore, the safest approach is to compare the shaft dimensions, the overall width and the outer diameter before replacing. MR Accesorios Industriales can help you find the correct interchangeability without inventing part numbers.

If you need a quote for a PER RP Y-bearing, send us the complete part number by WhatsApp. At MR Accesorios Industriales we reply promptly and offer alternatives if the exact part number is not in the catalogue. We can also advise you on the suitable housing and mounting accessories. Write to us and we will send you a quote with no obligation.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.