SKF PBMF 304030 M1G1 friction bushing
- Brand
- SKF
- Category
- Bushings and sleeves
- Subcategory
- Friction bushings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF PBMF 304030 M1G1 is a reference of friction bushing, within Bushings and sleeves. Request a quote for PBMF 304030 M1G1 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
They are used when a compact, maintenance-free solution with good radial load capacity is required. MR Accesorios Industriales sells this line as part of its range of power transmission and support components for Argentine industry.
The PBMF series designation combines letters and numbers that identify the bushing type and its dimensions. For example, the codes in the PBMF series correspond to friction bushings with standardized dimensions. The middle digits indicate inner diameter, outer diameter and width, while the suffixes M1G1 refer to construction and material characteristics. To select the correct code, it is always best to use the drawing or the measurement of the housing and the shaft.
These bushings are used in a wide variety of industrial equipment: presses, pumps, fans, conveyors, machine tools and lifting systems. In Argentina, they are common in the maintenance of food, chemical, cement and steel plants, where worn bushings must be replaced without modifying the assembly. Their thin-wall design allows simple installation and a precise fit in machined housings.
To choose the right bushing, consider the radial load, rotation speed and environmental conditions. Mounting is done by pressing or with suitable tools, checking the alignment of the shaft and the housing. Lubrication may be permanent or may require re-greasing depending on the bushing material and the type of movement. It is essential to respect the recommended clearance and avoid impacts that deform the bushing wall.
SKF bushings in the PBMF series can be interchanged with equivalent products from other brands, as long as the dimensions and material properties match. These are not identical codes, but alternatives that perform the same function. When replacing, it is key to compare tolerances, allowable load and service conditions to ensure similar performance.
If you need a quote for SKF PBMF series friction bushings, write to us on WhatsApp with the complete code or the housing and shaft measurements. At MR Accesorios Industriales we advise you so you can find the right part for your equipment.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm the dimensions and version against the manufacturer's data sheet.
Frequently Asked Questions
- What does the PBMF designation mean on SKF bushings?
- PBMF identifies a family of SKF friction bushings. The numbers that follow indicate standardized dimensions and the suffixes indicate material or construction characteristics. To interpret a specific code, it is best to consult a specialist and verify the actual measurements of the component.
- How do I know which bushing I need for my machine?
- You must measure the shaft diameter, the housing inner diameter and the available width. With that data and the load and speed conditions, the right bushing is selected. If you have the original code, send it by WhatsApp and we will help you identify the corresponding option.
- Are SKF PBMF bushings interchangeable with other brands?
- They can be interchangeable with bushings from other manufacturers if the dimensions and material properties match. There is no universal code equivalence, so tolerances and load capacity must be compared before replacing. Ask us and we will guide you in the selection.