Y-bearing unit SKF P2BTC 30M-TPSS

SKF P2BTC 30M-TPSS is a y-bearing unit reference, within Bearing housings. Request a quote for P2BTC 30M-TPSS via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The Y-bearing unit with SKF insert bearing is a ready-to-mount shaft unit that combines a cast iron or sheet steel housing with a sealed insert ball bearing, fixed to the shaft with set screws or an eccentric locking collar. It is used in equipment that needs a compact, self-aligning and easy-to-install solution, such as conveyor belts, fans, mixers and agricultural machinery. MR Accesorios Industriales carries this line with technical advice to choose the right configuration for the shaft and application.

The designation of this series is read in blocks: the letter P indicates a pillow block or split flange housing, the number that follows indicates the dimensional series, and the letters BTC identify the housing and fixing type. The suffix M refers to the insert's shaft fixing system, and TPSS defines the sealing and service conditions. For example, P2BTC 30M-TPSS and P2BTC 35M-TPSS share the same series and differ in shaft diameter: 30 and 35 mm respectively. Knowing this logic lets you order the exact code without ambiguity.

In Argentine industry, these housings appear in belt conveyors, bucket elevators, screens, balanced feed mixers, aggregate processing plants and agricultural equipment. They are also found in centrifugal fans, pumps and packaging lines. The combination of housing and insert simplifies mounting and reduces maintenance time, since the bearing comes pre-lubricated and sealed from the factory. It is a common solution when self-alignment and tolerance to small shaft misalignments are required.

To select correctly, take into account the shaft diameter, the type of load (radial, axial or combined), the rotation speed and the environmental conditions. The TPSS sealing offers protection against dust and moisture, suitable for environments with particles. Make sure the housing rests on a flat, rigid surface; a deformed base accelerates wear. The insert's lifetime lubrication requires no additional maintenance, but in severe applications periodic re-greasing may be necessary. Fixing to the shaft with set screws must be done with the right wrench and following the recommended torque.

As for equivalents, Y-bearing units are manufactured under dimensional standards that allow units to be interchanged between different manufacturers when the series, shaft diameter and fixing type match. However, not all suffixes are equivalent: the sealing, internal clearance and fixing system can vary. Therefore, before replacing a unit, it is advisable to verify the full code and the service conditions. MR Accesorios Industriales can advise you on compatibility with other brands, always starting from the original code.

If you need a quote for a Y-bearing unit with SKF insert bearing, send us the full code on WhatsApp. With the example P2BTC 30M-TPSS or P2BTC 35M-TPSS we can identify the unit and offer you the alternative that best suits your equipment. At MR Accesorios Industriales we provide technical support so that replacement is fast and safe.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.