SKF P 47 y-bearing unit

SKF P 47 is a reference of y-bearing unit, within Bearing housings. Request a quote for P 47 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The SKF Y-bearing housing with insert bearing is an assembled unit that combines a bearing housing with an insert bearing, ready to mount on shafts and structures. It is used to guide and support rotating shafts in equipment where simple installation and quick maintenance are required. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, with technical advice to choose the right size.

The designation of this line is read as P followed by a two-digit number that indicates the shaft diameter in millimeters. For example, P 40 corresponds to a housing for a 40 mm shaft, while P 85 is for an 85 mm shaft. The letter P identifies the split plummer block housing series, widely used in general applications. Each size maintains a standardized relationship between the shaft diameter and the housing dimensions, which makes replacement and interchangeability within the series easier.

These housings are used in a wide variety of industries in Argentina: from conveyor lines and bottling plants to mills, mixers, fans and agricultural equipment. They are common in machines where the shaft must rest on a flat base and mounting does not require precision alignment. They are also found in conveyors in food plants, where cleaning and quick replacement are a priority. Their split plummer block design allows the shaft to be removed without disassembling the rest of the assembly.

To select the right housing, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. Check the sealing of the insert bearing: versions with a contact seal are suitable for dusty or humid environments. Mounting requires the base to be well supported and aligned with the shaft; excessive misalignment accelerates wear. Lubrication must follow the manufacturer's instructions and be renewed according to the duty cycle. In applications with vibration, secure the mounting bolts to the recommended torque.

As for equivalents, Y-bearing housings with insert bearings from different brands usually share standardized dimensions, which allows direct interchange if the shaft and housing dimensions are respected. However, the type of sealing, the permissible load and the system for fixing the insert to the shaft may vary. Therefore, before replacing a unit, it is advisable to verify the complete designation and the service conditions. MR Accesorios Industriales sells SKF and can advise you on compatible alternatives.

If you need a quote for an SKF Y-bearing housing with insert bearing, send us the complete code on WhatsApp. With the shaft size and the application data, we will quote the corresponding reference and coordinate delivery. MR Accesorios Industriales supports Argentine industry with power transmission components and housings.