Product page
Lock washer SKF MBL 36
- Manufacturer Part Number
- MBL 36
- Brand
- SKFOfficial brand
- Category
- Bushings and sleeves
- Subcategory
- Lock washer
Other brands in this family
- BGL
- EMMAR
Ask us about alternatives. Equivalence is verified for each reference and application.
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF MBL 36 is a lock washer reference, within Bushings and sleeves. Request a quote for MBL 36 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The SKF MBL lock washer is a fastening component used together with a slotted lock nut to secure bearings and other elements on threaded shafts. Its design with an inner tab and several outer tabs allows locking the nut in the desired position, preventing it from loosening due to vibration. MR Accesorios Industriales carries this series as part of its line of bushings and sleeves, with more than 80 years of experience in the industry.
The MBL designation identifies SKF lock washers for metric shafts. The number following the letters indicates the shaft diameter for which the washer is intended: for example, MBL 24 corresponds to a 24 mm shaft, MBL 30 to a 30 mm shaft, and so on. This simple nomenclature allows selecting the appropriate washer according to the shaft size where the lock nut will be mounted.
These washers are used in a wide variety of industrial applications in Argentina: from machine tools and transmission equipment to pumps, fans and conveyors. They are common in bearing maintenance in manufacturing plants, metalworking shops and agro-industrial facilities, where secure and reliable fastening of bearings on shafts is required.
For correct selection, take into account the shaft diameter and the type of nut you will use. The inner tab of the washer must fit into the shaft groove, while one of the outer tabs is bent over a slot in the nut to lock it. It is essential that the washer is the right size and that assembly is performed with the appropriate tools to avoid deformation.
Regarding interchangeability, SKF MBL lock washers can be replaced by equivalent products from other brands that follow the same dimensional standard. Always verify that the tab dimensions and bore diameter match those of the original shaft and nut. If you have doubts, consult us with the exact part number and we will advise you.
If you need MBL lock washers for your application, send us the complete part number via WhatsApp and we will quote you promptly. At MR Accesorios Industriales we have the experience to help you choose the correct component and ensure efficient assembly.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- How do I know which MBL washer number I need?
- The number indicates the shaft diameter in millimeters. Measure the shaft diameter where the nut is mounted and choose the matching MBL washer. For example, for a 30 mm shaft use MBL 30. If you have doubts, consult us with the measurement.
- Does the MBL washer work with any lock nut?
- No, it must be compatible with the type of nut you are using. It is generally used with slotted nuts that have notches for the outer tab. Verify that the nut diameter and pitch match the selected MBL washer.
- Where can I get SKF MBL washers in Argentina?
- At MR Accesorios Industriales we carry the SKF brand, including the MBL series. Write to us via WhatsApp with the part number you need and we will send you a quote. We serve the entire country.