SKF GEH 35 TXE-2LS spherical plain bearing

SKF GEH 35 TXE-2LS is a reference of spherical plain bearing, within Bearings. Request a quote for GEH 35 TXE-2LS via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

SKF GEH TXE-2LS radial spherical plain bearings are spherical sliding bearings that allow oscillating and aligning movement between shafts. They are used in mechanisms where misalignment and radial loads must be absorbed, with double sealing to retain lubricant and block contaminants. MR Accesorios Industriales sells this line, with technical advice to choose the size and the thread or mounting type for your application.

The GEH designation corresponds to radial spherical plain bearings of the GEH series, with metric dimensions and a spherical inner ring. The number that follows indicates the bore diameter in millimeters. The TXE suffix indicates the treatment and the design of the sliding surfaces: a PTFE cage reinforced with glass fiber and treated steel sliding surfaces, which reduce maintenance. The -2LS suffix indicates double lip sealing, one on each side, to retain grease and protect against dust and water.

These spherical plain bearings are used in machines where there is oscillating motion or misalignment between components: hydraulic and pneumatic cylinders, vehicle steering, suspension systems, robot arms, presses, earthmoving equipment, cranes and conveyors. In Argentine industry they appear in agriculture (seeders, harvesters), mining, steelmaking and process plants. They are also found in lifting equipment and in boat steering mechanisms. Their ability to withstand combined radial and axial loads makes them versatile at articulation points.

To select a GEH TXE-2LS spherical plain bearing, take into account the bore diameter, the type of load (radial, axial or combined) and the required oscillation angle. The -2LS seal requires a clean contact surface free of burrs; if the environment has a lot of dirt or water, it is advisable to check the condition of the lips and renew the lubrication. Mounting is done by fit in the housing or with a retaining ring, depending on the design. It is important to correctly align the shaft and the support to avoid lateral forces that shorten service life. The initial lubrication comes from the factory; in service, follow the manufacturer's instructions for the relubrication interval.

SKF GEH TXE-2LS series radial spherical plain bearings are interchangeable with other brands that follow the same dimensional designation and the same type of sealing. When replacing, check that the bore diameter, width and outside diameter match, and that the TXE-2LS suffix is present if you need the PTFE cage and double sealing. If space allows, a single-sealed spherical plain bearing can replace a sealed one, but not the other way around without evaluating contamination. Always consult the tolerances and radial clearance to ensure compatibility.

To request a quote for your GEH TXE-2LS spherical plain bearing, send the complete part number by WhatsApp to MR Accesorios Industriales. If you do not have it at hand, send the bore dimensions and working conditions and we will help you identify it. MR Accesorios Industriales advises you so that you choose the right spherical plain bearing and avoid unnecessary downtime.