SKF GEH 35 ESX-2LS spherical plain bearing

SKF GEH 35 ESX-2LS is a reference of spherical plain bearing, within Bearings. Request a quote for GEH 35 ESX-2LS via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

SKF GEH ESX-2LS series rod ends and spherical bearings are radial spherical plain bearings that allow oscillating motion and misalignment between shafts. They are used in applications with combined loads and a need for articulation, such as hydraulic cylinders, steering systems and suspensions. MR Accesorios Industriales sells this line so you can handle oscillating motion with quality components.

The GEH … ESX-2LS designation reads as follows: GEH indicates a radial spherical plain bearing of the GEH series, with dimensions according to ISO standard. The number that follows is the bore diameter in millimeters; for example, GEH 30 ESX-2LS has a 30 mm bore diameter. The ESX suffix indicates that the inner ring has a special design, generally with a groove and lubrication holes. The -2LS suffix indicates double lip sealing, one on each side, to retain lubricant and exclude contaminants. This combination is common in applications requiring protection against dust and moisture.

These rod ends are used in industries such as metallurgy, automotive, agriculture and construction. In Argentina, you will find them in hydraulic cylinders of road machinery, in steering arms of heavy vehicles, in suspension systems and in earthmoving equipment. They are also used in presses, cranes and lifting equipment where misalignments and variable loads need to be absorbed. Their ability to withstand combined radial and axial loads makes them versatile for demanding articulation points.

To select a GEH ESX-2LS rod end, take into account the bore diameter, the type of load (radial, axial or combined) and the environmental conditions. The -2LS sealing is suitable for environments with moderate dust or moisture; if there is exposure to liquids or heavy dirt, consider additional protection. Mounting requires alignment between the shafts and proper lubrication: these rod ends come with a groove and lubrication holes, so you can grease them periodically. Verify the radial clearance and the permissible tilting angle according to the SKF catalog.

As for equivalences, GEH rod ends follow standardized dimensions, so they can be interchanged with products from other brands that comply with the same standard and designation. However, not all brands offer the same sealing or treatment; the -2LS suffix is specific to SKF. If you need to replace an existing rod end, the safest approach is to compare the critical dimensions: bore diameter, outside diameter, width and seal type. MR Accesorios Industriales can help you identify the correct reference.

If you have the code of the rod end you need, send it on WhatsApp to MR Accesorios Industriales and we will quote you. We work with the SKF line and can advise you on the application and mounting. Do not hesitate to ask us about special sizes or other rod end series.