Product page
Y-bearing unit SKF FYTWK 505 Y
- Manufacturer Part Number
- FYTWK 505 Y
- Brand
- SKFOfficial brand
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
SKF FYTWK 505 Y is a y-bearing unit reference, within Bearing housings. Request a quote for FYTWK 505 Y via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The SKF FYTWK Y bearing is a split plummer block housing assembly with insert bearing, designed for quick mounting and automatic alignment. It is used in equipment with shafts that require support and continuous rotation, such as conveyors, fans and agricultural machinery. Its construction allows the bearing to be fixed to the shaft with set screws and the housing to be mounted on flat surfaces. MR Accesorios Industriales carries this line for industrial applications in Argentina.
The designation FYTWK corresponds to a split cast iron housing with a Y-series insert bearing. The examples FYTWK 504 Y, FYTWK 505 Y, FYTWK 506 Y and FYTWK 507 Y show the progression of sizes: the final digits indicate the shaft diameter in inches (504 for 3/4", 505 for 25 mm, etc.). The final letter Y identifies the insert bearing with set screws. The suffix WK indicates the design with two mounting and lubrication holes. Consult the size table for each part number.
These bearings are used in belt conveyors, bucket elevators, centrifugal fans, mixers and equipment for the food and agricultural industry. In Argentina, they are common in grain processing plants, meat processing plants and packaging lines. Their split design facilitates mounting and dismounting without dismantling the shaft, which reduces maintenance times. They are also used in textile and packaging machines.
To select the bearing, verify the shaft diameter and the type of load. The insert bearing comes lubricated from the factory and protected with lip seals. During mounting, ensure the alignment of the bearings and tighten the set screws on the shaft to the recommended torque. Periodic lubrication with lithium grease extends service life. Avoid striking the bearing and check the axial clearance after installation.
SKF FYTWK Y bearings are interchangeable with other brands that follow the standard for split plummer block housings with insert bearing, such as NTN, NSK or FAG. When replacing, compare the mounting dimensions and the shaft diameter. The designation may vary between manufacturers, but the functionality is equivalent. MR Accesorios Industriales carries the SKF brand as part of its line of bearing housings.
If you need an FYTWK Y bearing, send us the complete part number by WhatsApp. At MR Accesorios Industriales we advise you to choose the correct size and quote you promptly. We also have insert bearings and mounting accessories to complete your order.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- What does the designation FYTWK 505 Y mean?
- FYTWK indicates a split plummer block housing with a Y-series insert bearing. The digits 505 correspond to the shaft diameter: 25 mm. The final letter Y identifies the bearing with set screws. It is an SKF part number that facilitates selection according to shaft size.
- Does this bearing come with the insert bearing included?
- Yes, the FYTWK Y bearing is supplied as an assembled unit: it includes the split cast iron housing and the Y-series insert bearing already mounted. It only needs to be fixed to the shaft and to the support surface.
- How are these bearings lubricated?
- The insert bearing has a lubrication groove accessible through the housing. It is recommended to apply lithium grease periodically with a grease gun. The frequency depends on the working conditions: the more demanding they are, the more often.