SKF FYTBK 30 TR y-bearing unit

SKF FYTBK 30 TR is a reference of y-bearing unit, within Bearing housings. Request a quote for FYTBK 30 TR via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The SKF Y-bearing housing with insert bearing from the FYTBK TR series is an assembled unit that combines an insert bearing with a cast split housing. It is used to mount rotating shafts on metal structures or masonry, facilitating mounting and replacement. It is a common solution in transmission and conveying equipment operating at moderate speeds, where simplicity of mounting and good radial load capacity are sought.

The FYTBK TR designation is read in parts: FYTBK identifies the housing type and the fixation system, TR indicates that the insert bearing comes with an extended inner ring and set screws to fix the shaft. Examples in the series are FYTBK 20 TR, FYTBK 25 TR, FYTBK 30 TR and FYTBK 35 TR. The central number (20, 25, 30, 35) corresponds to the shaft diameter in millimeters. Suffixes may vary according to sealing or type of fixation, so it is advisable to verify the complete code before requesting a quote.

These housings appear in belt conveyors, bucket elevators, mixers, mills, packaging belts and equipment for the food, chemical and materials industries. In Argentina they are found in balanced feed plants, meat processing plants, ceramics and aggregate processing plants. Their split format allows mounting the shaft without disassembling the entire line, which reduces downtime in maintenance.

To select the housing, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The sealing of the insert bearing defines the protection against dust and moisture: for dirty environments or frequent washdowns, choose versions with reinforced seals. Factory lubrication is usually sufficient for service life, but in demanding applications it is advisable to plan for relubrication. Alignment of the housing with the shaft is critical: excessive misalignment accelerates wear of seals and raceways.

Regarding equivalences, each manufacturer has its own nomenclature for Y-bearing housings with insert bearings. The same shaft diameter may correspond to different codes depending on the brand, and they are not always interchangeable without verifying mounting dimensions, center height and distance between holes. If you need to replace an existing housing, the safest is to compare drawings or actual measurements. MR Accesorios Industriales sells SKF as a brand, and can guide you on the appropriate equivalence.

To proceed with the quote, send us by WhatsApp the complete code of the housing you need, for example FYTBK 25 TR, or the shaft and old housing measurements. With that data we can confirm the exact reference and offer you the alternative that best suits your application. MR Accesorios Industriales accompanies Argentine industry with transmission components and bearings.