Y-bearing unit SKF F4BC 25M-TPSS

SKF F4BC 25M-TPSS is a y-bearing unit reference, within Bearing housings. Request a quote for F4BC 25M-TPSS via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The Y-housing with SKF insert bearing is an assembled unit that combines a cast iron housing with a ball insert bearing, ready to mount on transmission shafts. It is used to support rotating shafts in equipment where simple alignment and permanent lubrication are required. MR Accesorios Industriales carries this line in Buenos Aires, Argentina, with technical advice to choose the correct part number for your application.

The designation of this line is read in blocks. The letters F and BC identify the category of Y-housings with insert bearing. The number following F indicates the number of housing mounting holes: F2BC for two holes and F4BC for four. Then comes the shaft diameter in millimeters, as in F2BC 20M-TPSS or F4BC 35M-TPSS. The suffix M indicates the type of insert-to-shaft fastening, and TPSS indicates the sealing and grease type. Thus, F2BC 25M-TPSS is a two-hole housing for a 25 mm shaft with TPSS sealing.

These housings are used in conveyors, belts, elevators, mixers, fans and packaging lines. In Argentina they are common in food plants, cement plants, paper mills and cold storage facilities, where the environment has dust, humidity or frequent washdowns. The cast iron housing withstands radial loads and the ball insert allows moderate speeds with little maintenance. They also appear in material handling equipment and agricultural machinery.

To choose well, take into account the shaft diameter, radial and axial load, and the type of sealing. The suffix TPSS usually indicates contact seals with long-life grease, suitable for humid environments or environments with particles. Verify the alignment of the housing with the shaft and the mounting surface; poor alignment shortens bearing life. The insert is fastened to the shaft with the set screws included in the assembly. Lubricate only if the design allows it and follow the manufacturer's instructions.

Regarding equivalences, Y-housings with insert bearing are interchanged between brands by standardized dimensions: shaft diameter, distance between holes and height to center. If your equipment has a housing from another brand, compare those dimensions before replacing. Part numbers may vary between manufacturers, but the critical dimensions usually match. MR Accesorios Industriales can help you find the right replacement within the SKF line it carries.

If you need a Y-housing with insert bearing, send us the complete part number via WhatsApp. With F2BC 30M-TPSS or F4BC 25M-TPSS we can identify the exact variant and quote you. We also advise on assembly and application. MR Accesorios Industriales, Buenos Aires, Argentina, more than 80 years in the business.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.