SKF 6314 N/C3 deep groove ball bearing

SKF 6314 N/C3 is a reference of deep groove ball bearing, within Bearings. Request a quote for 6314 N/C3 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The SKF deep groove ball bearing is an essential component for supporting radial and axial loads in industrial machinery. Its single-row design with deep grooves allows high speeds and low maintenance. At MR Accesorios Industriales we supply the SKF brand, a world reference in bearings, so that your equipment works reliably.

The designation of these bearings follows a clear system: the first two digits indicate the type and dimension series. For example, 6206 N/C3 corresponds to a deep groove ball bearing of the 62 series, characterized by its medium section. The suffix N indicates a snap ring groove on the outer ring, which facilitates axial positioning. C3 indicates a radial internal clearance greater than standard, useful when there are tight fits or thermal differences between rings. In the examples 6207 N/C3, 6208 N/C3, 6310 N/C3 and 6314 N/C3 the same criterion is repeated: series 62 or 63, N groove and C3 clearance. Knowing these codes allows you to select the right bearing without ambiguity.

These bearings are used in a wide variety of industries in Argentina: from centrifugal pumps and fans to conveyors, mixers and machine tools. The 62 series is usually used in medium-sized equipment, while the 63 series, with greater load capacity, appears in more demanding applications. Thanks to their versatility, they are common in food, chemical, cement plants and in the metalworking sector. If your equipment operates with combined loads or requires high speed, an SKF deep groove ball bearing with the right characteristics can be the solution.

To select correctly, take into account the radial and axial load, the rotation speed and the environmental conditions. The suffix N allows the outer ring to be fixed axially with a retaining ring, simplifying the housing design. C3 clearance is recommended when the fit is tight or when the working temperature exceeds 70 °C, as it compensates for expansion. During assembly, ensure precise alignment between the supports and adequate lubrication: high-quality grease for normal applications or oil if heat dissipation is required. Avoid striking the rings during installation.

Regarding equivalences, SKF bearings are interchangeable with those of other brands that follow the same standardized dimensions. A code such as 6206 N/C3 from SKF can be replaced by a bearing from another manufacturer that has an identical designation and suffixes. However, always verify the tolerances and radial clearance, because they can vary between manufacturers. At MR Accesorios Industriales we supply SKF as a brand, which guarantees quality and support. If you need advice to find the right replacement, our technical team can help you.

If you already have the code of your bearing, send it via WhatsApp to MR Accesorios Industriales and we will quote you without obligation. We can also guide you if you need help identifying the correct designation for your application. At MR Accesorios Industriales we offer reliable solutions for your machinery.