FAG 6314 deep groove ball bearing
- Brand
- FAG
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
SKF vs FAG: equivalent part numbers →NSK vs FAG: equivalent part numbers →FAG vs TIMKEN: equivalent part numbers →FAG vs RKB: equivalent part numbers →FAG vs KOYO: equivalent part numbers →
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read FAG 6314
- 63Series
- Deep groove ball bearings, 63 series. For the same bore, each series has a different outside diameter and width.
- 14Bore
- 70 mm bore: 14 × 5.
6314 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The FAG 6314 bearing has a 70 mm bore, a 150 mm outside diameter and a 35 mm width (70 x 150 x 35 mm).
FAG 6314 is a reference of deep groove ball bearing, within Bearings. Request a quote for 6314 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The deep groove ball bearing is the most widely used type of bearing: it supports radial and axial loads in both directions, runs at high speeds and requires little maintenance. It is used in electric motors, pumps, fans, gearboxes and a huge variety of industrial equipment. MR Accesorios Industriales supplies the FAG brand in Buenos Aires, Argentina.
The designation of the 60 series is read directly: the first digits indicate the type and the dimension series, and the following ones the size. For example, 6003, 6008 or 6014 correspond to the 60 series, which is characterized by its thin section. The suffixes that may appear after the number (such as 2RS, C3 or ZZ) indicate the type of sealing, the tolerance or the internal clearance, as applicable. If you have any doubts, send us the complete part number and we will verify it.
These bearings are used in electric motors, centrifugal pumps, fans, compressors, conveyors, machine tools and power transmission equipment in general. In Argentina you will find them in food, textile, chemical and cement plants and in the metalworking sector. Their versatility makes them suitable for both light-load assemblies and moderate demands, as long as the correct clearance and sealing are selected.
To choose well, take into account the load, speed, temperature and environment. If there is dust or moisture, a contact seal (2RS) or a metal shield (ZZ) is advisable. If the bearing operates with thermal expansion, it may require C3 clearance. Assembly must be done with suitable tools, without striking the rings, and with correct alignment between shaft and housing. Factory lubrication is usually sufficient for the entire service life in normal applications.
When replacing, interchangeability between brands is common if the main dimensions and the type of execution match. A deep groove ball bearing from another brand with the same basic designation is usually equivalent, but always check the suffixes: a different seal or a different clearance can change performance. At MR Accesorios Industriales we supply FAG as a brand and we can advise you on the right equivalent.
If you need an FAG deep groove ball bearing, send us the part number on WhatsApp. We will quote you shortly and advise you so that you get the option that best suits your equipment. At MR Accesorios Industriales we know the applications and can help you resolve your inquiry.
Dimensions
Boundary dimensions of the basic designation 6314 per ISO 15: 70 x 150 x 35 mm (d x D x B).
- Bore
- 70mm
- Outside diameter (D)
- 150mm
- Width (B)
- 35mm
Same size in SKF and other brands
Pages from other brands with the basic designation 6314: 70 x 150 x 35 mm (d x D x B) per ISO 15.
- Looking for the SKF 6314? We also quote:63146314/C36314/C425 more →
- KOYO6314
- NSK63146314 ZZ
- RKB6314
- TIMKEN63146314MB
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the FAG 6314 bearing?
- The FAG 6314 bearing has a 70 mm bore, a 150 mm outside diameter and a 35 mm width (70 x 150 x 35 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 6314.
- What does the suffix mean on an FAG bearing?
- The suffixes indicate characteristics such as sealing (2RS for contact, ZZ for metal shield), internal clearance (C3 for greater clearance) or tolerance. It is important to respect them when replacing so as not to affect performance.
- How do I know if a bearing from another brand is equivalent?
- Compare the basic designation and the suffixes. If the dimensions and execution match, they are usually interchangeable. If in doubt, ask us with the part number and we will help you verify.
- What care does assembly require?
- Avoid striking the rings, use suitable tools and ensure alignment between shaft and housing. Correct lubrication and proper fitting extend the service life of the bearing.