SKF 6205 ETN9/C3H deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 6205 ETN9/C3H
- 62Series
- Deep groove ball bearings, 62 series. For the same bore, each series has a different outside diameter and width.
- 05Bore
- 25 mm bore: 05 × 5.
- ETN9/C3HSuffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
6205 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 6205 ETN9/C3H bearing has a 25 mm bore, a 52 mm outside diameter and a 15 mm width (25 x 52 x 15 mm).
SKF 6205 ETN9/C3H is a reference of deep groove ball bearing, within Bearings. Request a quote for 6205 ETN9/C3H via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The SKF deep groove ball bearing with ETN9/C3H suffixes is a component designed to support radial and axial loads in both directions, with a polyamide cage and a C3H internal clearance that facilitates operation under high-temperature conditions. It is used in a wide variety of industrial applications, from electric motors to pumps and fans, where reliable performance and long service life are required.
The designation ETN9/C3H is interpreted as follows: the prefix ETN9 indicates that the bearing has a glass fiber reinforced polyamide cage, suitable for high temperatures; the letter C3 indicates a greater internal radial clearance than standard, and the final H specifies that the bearing is designed to withstand temperatures up to 120 °C. Examples of this type, such as 6204 ETN9/C3H and 6205 ETN9/C3H, show that these are bearings of the 62 series, medium section, with the mentioned characteristics.
These bearings are used in industries such as food, chemical, petrochemical and power generation, in equipment such as electric motors, centrifugal pumps, fans, compressors and conveyors. Their ability to operate at elevated temperatures makes them suitable for ovens, dryers and thermal processes. In Argentina, they are common in industrial plants that require high reliability and low maintenance.
To select the appropriate bearing, it is essential to consider radial and axial load, rotation speed and environmental conditions. The C3H clearance allows compensating thermal expansions and ensuring smooth operation. During assembly, it is recommended to use appropriate tools, verify shaft and housing alignment, and lubricate with grease compatible with the operating temperature. Avoid striking the bearing and ensure that the seals are correctly installed to prevent contamination.
Regarding equivalences, SKF bearings with ETN9/C3H suffixes can be interchanged with products from other brands that meet the same dimensional and clearance specifications. However, it is important to verify tolerances and cage type, as they may vary between manufacturers. Always consult interchange tables or contact a specialist to ensure compatibility.
To obtain an accurate quote, send the complete bearing code you need via WhatsApp to MR Accesorios Industriales. Our technical team will advise you and provide the necessary information so you can place your order with confidence.
Dimensions
Boundary dimensions of the basic designation 6205 per ISO 15: 25 x 52 x 15 mm (d x D x B).
- Bore
- 25mm
- Outside diameter (D)
- 52mm
- Width (B)
- 15mm
The same size in other brands
Pages from other brands with the basic designation 6205: 25 x 52 x 15 mm (d x D x B) per ISO 15.
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF 6205 ETN9/C3H bearing?
- The SKF 6205 ETN9/C3H bearing has a 25 mm bore, a 52 mm outside diameter and a 15 mm width (25 x 52 x 15 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 6205.
- What does the C3H suffix mean in this bearing?
- The C3H suffix indicates that the bearing has a greater internal radial clearance than standard (C3) and is designed to withstand temperatures up to 120 °C (H). This allows compensating thermal expansions and ensuring proper operation in heat applications.
- What are the typical applications of this bearing?
- It is used in electric motors, pumps, fans, compressors and conveyors, especially in food, chemical and petrochemical industries. Its high-temperature capability makes it ideal for ovens and dryers.
- How can I ensure interchangeability with other brands?
- Verify that dimensions, internal clearance and cage type match the specifications of the SKF bearing with ETN9/C3H suffixes. Consult equivalence tables or contact MR Accesorios Industriales for technical advice.