FAG 6205-C deep groove ball bearing
- Brand
- FAG
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read FAG 6205-C
- 62Series
- Deep groove ball bearings, 62 series. For the same bore, each series has a different outside diameter and width.
- 05Bore
- 25 mm bore: 05 × 5.
- CSuffix
- FAG suffix: it defines the variant (sealing, cage, internal clearance or other features).
6205 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The FAG 6205-C bearing has a 25 mm bore, a 52 mm outside diameter and a 15 mm width (25 x 52 x 15 mm).
FAG 6205-C is a reference of deep groove ball bearing, within Bearings. Request a quote for 6205-C via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The FAG deep groove ball bearing of the -C series is a single row bearing with a sheet metal cage, designed to withstand moderate radial and axial loads in both directions. It is used in electric motors, pumps, fans, gearboxes and power transmission equipment in general. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, and helps you identify the exact part number for your application.
The designation of these bearings is read step by step. The base number indicates the size: for example, 629-C, 6000-C, 6001-C, 6002-C, 6004-C, 6005-C, 6006-C and 6007-C correspond to increasing bore diameters within the series. The -C suffix identifies a design variant within the deep groove ball bearing family. To confirm dimensions, tolerances and clearance for a specific part number, it is best to consult the manufacturer's data sheet or write to us with the complete part number.
These bearings appear in a large number of industrial equipment in Argentina: electric motors, centrifugal pumps, fans, compressors, machine tools, conveyors and gearboxes. They are also found in low and medium power applications where a simple, economical and reliable support is needed. Being an open design, they require lubrication and a reasonably clean environment to perform as intended.
To select the correct bearing, take into account the radial and axial load it will withstand, the rotation speed and the type of lubrication. During mounting, verify the alignment between housing and shaft, and apply the mounting force on the appropriate ring. If the equipment operates with dust, humidity or frequent washdowns, consider a sealed design. Proper lubrication and the correct internal clearance are key to the bearing's service life.
Regarding equivalences, single row deep groove ball bearings are interchangeable between manufacturers when the main dimensions and the type of design match. The same size may appear with different suffixes depending on the brand, indicating cage, sealing, clearance or tolerance. It is not advisable to replace by visual similarity: the complete designation and the service conditions must be compared before defining the replacement.
If you already have the part number of the bearing you need, send it via WhatsApp to MR Accesorios Industriales and we'll quote you shortly. If you don't have it at hand, send us the shaft and housing dimensions, the type of load and the working conditions, and we'll help you identify the right option within the FAG line.
Dimensions
Boundary dimensions of the basic designation 6205 per ISO 15: 25 x 52 x 15 mm (d x D x B).
- Bore
- 25mm
- Outside diameter (D)
- 52mm
- Width (B)
- 15mm
Same size in SKF and other brands
Pages from other brands with the basic designation 6205: 25 x 52 x 15 mm (d x D x B) per ISO 15.
- Looking for the SKF 6205? We also quote:62056205/C36205/C455 more →
- KOYO62056205R
- NSK62056205 ZZ
- RKB6205
- TIMKEN6205
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the FAG 6205-C bearing?
- The FAG 6205-C bearing has a 25 mm bore, a 52 mm outside diameter and a 15 mm width (25 x 52 x 15 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 6205.
- What does the -C suffix mean in a FAG bearing?
- The -C suffix identifies a design variant within the deep groove ball bearing family. To know exactly what it indicates in your part number, it is best to consult the complete designation and the manufacturer's data sheet. Send us the part number via WhatsApp and we'll advise you.
- How do I know if this bearing replaces the one I have mounted?
- Compare the main dimensions, the type of design and the service conditions. The complete designation and the suffixes mark differences in cage, sealing or clearance. It is not enough for the diameter to match. Send us the old and new part numbers via WhatsApp and we'll verify it.
- What data do you need to quote the correct bearing?
- Send the complete part number if you have it. If not, indicate shaft diameter, outer diameter, width, type of load and working conditions. With that data we can locate the right option within the FAG line. Write to us via WhatsApp and we'll quote you shortly.