Deep groove ball bearing SKF 6018-2RS1/MTF3

SKF 6018-2RS1/MTF3 is a deep groove ball bearing reference, within Bearings. Request a quote for 6018-2RS1/MTF3 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SKF RS/MTF series deep groove ball bearing is a single row bearing with double-sided sealing and factory-defined lubrication. It is used in equipment requiring low friction, high speed and protection against contaminants. It is a common choice in electric motors, pumps, fans and machine tools. MR Accesorios Industriales supplies this line as an official brand for the Argentine industrial market.

The designation of this series combines the RS suffix and the MTF code. The RS suffix indicates that the bearing has rubber seals on both sides, which retains the lubricant and blocks the entry of dust and moisture. The MTF code identifies a special factory lubrication, usually a high-performance grease for specific temperature or speed conditions. A concrete example is 6018-2RS1/MTF3, where the number 6018 defines the size and the suffixes the sealing and lubricant characteristics.

This type of bearing is found in applications where cleanliness and lubricant retention are critical. In Argentina it is seen in electric motors in the food industry, centrifugal pumps, induced draft fans, conveyor belts and machine tools. Also in mining and cement equipment, where dust is a constant challenge. Its double-sided sealing makes it suitable for environments with fine particles or vapors, provided that speed and temperature limits are respected.

To select correctly, take into account the internal clearance, the type of sealing and the lubrication. The RS seal is contact, so it provides greater protection but also somewhat more friction; if the equipment runs at very high revolutions, evaluate whether a non-contact seal is preferable. The MTF lubrication is factory-defined and must not be mixed with other greases. During mounting, ensure correct alignment between shaft and housing, and avoid impacts that could damage the seals or the raceways.

Regarding equivalences, deep groove ball bearings with double-sided sealing are available from different brands under similar nomenclatures, although the suffixes may vary. For example, other manufacturers use 2RS, 2RSH or DDU to indicate rubber seals. Dimensional interchangeability is usually guaranteed if the bore, outer diameter and width match, but the lubrication and sealing conditions may differ. Always verify the original manufacturer's data sheet before replacing one bearing with another of a different brand.

If you need this SKF RS/MTF series bearing, send us the complete code by WhatsApp. At MR Accesorios Industriales we advise you so that you choose the correct variant according to your application. We can also help you interpret the designation if you have doubts about the suffixes.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.