SKF 23092 CA/C3W33 spherical roller bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Spherical roller bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read SKF 23092 CA/C3W33
- 230Series
- Spherical roller bearings, 230 series. For the same bore, each series has a different outside diameter and width.
- 92Bore
- 460 mm bore: 92 × 5.
- CA/C3W33Suffix
- SKF suffix: it defines the variant (sealing, cage, internal clearance or other features).
23092 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The SKF 23092 CA/C3W33 bearing has a 460 mm bore, a 680 mm outside diameter and a 163 mm width (460 x 680 x 163 mm).
SKF 23092 CA/C3W33 is a reference of spherical roller bearing, within Bearings. Request a quote for 23092 CA/C3W33 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
SKF spherical roller bearings are self-aligning double-row components designed to support high radial loads and axial loads in both directions, even with misaligned shafts. They are used in demanding industrial applications where shaft deflection or mounting errors require self-aligning capability. MR Accesorios Industriales supplies this line with technical advice to select the right execution for the application.
The designation of these bearings follows a clear scheme. The basic number, such as 23088, indicates the type and dimension series: 230 for wide series, 231 and 232 for more robust series. The suffixes provide key information: CA defines the design with machined brass cage and centered guidance, C3 indicates an internal radial clearance greater than normal, W33 indicates the presence of a lubrication groove and holes in the outer ring, and C083W507 identifies a special execution with specific clearance and lubrication. Recognizing these codes allows you to quickly interpret the characteristics of each variant.
These bearings are used in industries such as cement, mining, steel, paper and material handling. They are found in gearboxes, conveyor belts, mills, crushers, screens, industrial fans and paper machines. Their ability to support combined loads and misalignment makes them suitable for equipment subjected to vibration, shock or shaft deflection. In Argentina, they are common in cement plants, quarries, sugar mills and aggregate processing plants.
To select correctly, take into account the radial and axial load, the rotational speed, the type of lubrication and the environmental conditions. The C3 internal clearance is recommended when there are interference fits, thermal gradients or high speeds. The W33 groove and holes facilitate relubrication, especially in contaminated environments. During mounting, ensure proper alignment and verify residual clearance; use appropriate mounting tools to avoid damage to the rings or rollers. Lubrication must be as specified and kept clean.
Regarding equivalences, SKF spherical roller bearings can be interchanged with products from other brands that follow the same standardized dimensions and similar designations. However, internal executions, clearances and suffixes may vary between manufacturers. Therefore, always verify the complete part number and technical specifications before replacing a bearing. MR Accesorios Industriales can advise you on interchangeability and available equivalent options.
If you need an SKF spherical roller bearing, send us the complete part number by WhatsApp. At MR Accesorios Industriales we help you identify the correct variant and request a quote.
Dimensions
Boundary dimensions of the basic designation 23092 per ISO 15: 460 x 680 x 163 mm (d x D x B).
- Bore
- 460mm
- Outside diameter (D)
- 680mm
- Width (B)
- 163mm
The same size in other brands
Pages from other brands with the basic designation 23092: 460 x 680 x 163 mm (d x D x B) per ISO 15.
- FAG23092-BEA-XL-MB123092-BEA-XL-K-MB1
- LINK-BELT23092K23092LBC323092LBKC3
- NSK23092CAME423092CAMKE4
- NTN23092B23092BK
- RKB23092
- TIMKEN23092YMB
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the SKF 23092 CA/C3W33 bearing?
- The SKF 23092 CA/C3W33 bearing has a 460 mm bore, a 680 mm outside diameter and a 163 mm width (460 x 680 x 163 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 23092.
- What does the suffix C3 mean in an SKF bearing?
- The suffix C3 indicates an internal radial clearance greater than normal. It is used when operating conditions generate thermal expansion or when interference fits reduce clearance, thus avoiding excessively tight operation.
- What is the W33 designation for?
- W33 indicates that the bearing has a lubrication groove and three lubrication holes in the outer ring. This facilitates relubrication and improves lubricant distribution, especially in applications with high loads or contaminated environments.
- How do I know if I can replace a bearing from another brand with an SKF one?
- You must verify that the main dimensions and the type of execution match. Although standards allow dimensional interchangeability, internal clearances and suffixes may differ. Consult us with the original part number and we will advise you.