EMMAR ASA 160 roller chain

EMMAR ASA 160 is a reference of roller chain, within Power transmission. Request a quote for ASA 160 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The ASA 160 chain is a roller chain with a 50.8 mm (2 inch) pitch, a 28.58 mm roller diameter and a 31.75 mm inner width. It is used in heavy-duty power transmissions, where high loads must be driven at moderate speeds. It is an ASA series chain, manufactured by SC, which MR Accesorios Industriales supplies. If you need to replace an existing chain or build a new transmission, send us the part number and we will quote you.

The ASA 160 is a roller chain from the ASA series, with a 50.8 mm pitch, a roller diameter of 28.58 mm and an inner width of 31.75 mm. These values define the geometry of the chain and are the ones you must verify before replacing it. The ASA 160 designation corresponds to a 2 inch pitch chain, used in transmissions where loads are high and speeds are not. SC manufactures it within its standard roller chain line.

This type of chain is found in heavy machinery transmissions, material handling equipment, conveyors, elevators and drag systems in industrial plants. It is also used in the field, in agricultural implements and irrigation equipment. In general, it appears on low-speed, high-torque shafts, where the chain works with significant loads and needs good wear resistance.

To install it, check that the sprockets have the correct pitch and that the number of teeth is compatible with the desired transmission ratio. Alignment between sprockets and proper tension are key to chain life. If the chain works in a dusty or dirty environment, it should be lubricated regularly. Before ordering, confirm the pitch, roller diameter and inner width, because a difference of a few millimeters can prevent installation.

Write to us on WhatsApp with the designation, pitch and main dimensions. At MR Accesorios Industriales we can help you identify the replacement or the equivalent chain within the SC line. We also work with sprockets and other transmission components, so if you are assembling the complete set, we can advise you.

Send the part number ASA 160 or the dimensions of your current chain by WhatsApp to MR Accesorios Industriales and we will send you a quote. If you have doubts about the equivalence with another standard or another brand, attach a photo of the chain and the sprocket. With that information we will tell you whether this reference is the one you need or whether an alternative is required.