REXNORD ZP6115MMF flange bearing 4 holes

REXNORD ZP6115MMF is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for ZP6115MMF via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

Rexnord ZP6000 series 4-bolt flange housings are mounted units that combine an insert bearing with a circular flange housing, designed to secure rotating shafts directly onto a flat surface. They are used when the shaft runs perpendicular to the mounting plane and rigid fastening with four anchor points is required. MR Accesorios Industriales sells this Rexnord line in Buenos Aires, Argentina, for power transmission and conveying equipment.

The ZP6000 series designation is read in blocks: the letters ZP identify the flange housing family, the four digits that follow indicate the unit size and the MMF suffix defines the housing and sealing configuration. The full pattern can be seen in the series part numbers: as the number changes, the bearing seating capacity changes. To choose, give the full part number exactly as it appears on the equipment nameplate.

These housings appear in belt conveyors, bucket elevators, mixers, blowers and continuous process lines. In food, cement, paper and aggregate processing plants in Argentina they are found on drive and tensioner shafts where flange mounting simplifies alignment. They are also used in pumping and ventilation equipment that requires firm fastening onto sheet metal or profile structures. The flange housing allows the assembly to be removed without fully disassembling the shaft.

To select the correct housing, take into account the shaft diameter, the insert bearing type and the sealing required by the environment. In areas with dust or moisture, it is advisable to check the protection against particle ingress and the presence of seals. Flange mounting requires the support surface to be flat and clean; the four holes are tightened with screws of suitable grade and an initial lubrication compatible with that of the bearing is recommended. Alignment between the housing and the shaft prevents parasitic loads and extends service life.

As for equivalents, 4-bolt flange housings are interchanged between manufacturers by shaft number, flange outer diameter and distance between holes, not by the commercial part number. Rexnord, Link-Belt and other mounted bearing brands use their own nomenclatures, so substitution is defined by comparing critical dimensions and insert type. If you need to replace a ZP6000 with another brand, send us the shaft and flange measurements and we will indicate the compatible alternative.

MR Accesorios Industriales sells the Rexnord line in Buenos Aires, Argentina. If your equipment uses a ZP6000 series housing, write to us on WhatsApp with the full part number and we will quote it promptly. We can also advise you on mounting and the right lubrication for your application.