Flange bearing 4 holes REXNORD ZP6110MMF

REXNORD ZP6110MMF is a flange bearing 4 holes reference, within Bearing housings. Request a quote for ZP6110MMF via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

Rexnord ZP6000 series 4-bolt flange housings are mounted units that combine an insert bearing with a circular flange housing, designed to fasten rotating shafts directly to a flat surface. They are used when the shaft runs perpendicular to the mounting plane and a rigid fastening with four anchor points is required. MR Accesorios Industriales supplies this Rexnord line in Buenos Aires, Argentina, for transmission and conveying equipment.

The ZP6000 series designation is read in blocks: the letters ZP identify the flange housing family, the four digits that follow indicate the unit size and the MMF suffix defines the housing and sealing configuration. In the examples ZP6080MMF, ZP6085MMF, ZP6090MMF, ZP6100MMF, ZP6110MMF, ZP6115MMF and ZP6125MMF the full pattern is visible: as the number changes, the bearing accommodation capacity changes. To choose, provide the complete part number as it appears on the equipment nameplate.

These housings appear in belt conveyors, bucket elevators, mixers, blowers and continuous process lines. In food, cement, paper and aggregate processing plants in Argentina they are found on drive and tensioner shafts where flange mounting simplifies alignment. They are also used in pumping and ventilation equipment that requires firm fastening to sheet metal or profile structure. The flange housing allows the assembly to be removed without completely disassembling the shaft.

To select the correct housing, take into account the shaft diameter, the insert bearing type and the sealing required by the environment. In areas with dust or moisture, verify the protection against particle ingress and the presence of seals. Flange mounting requires the support surface to be flat and clean; the four holes are tightened with bolts of adequate grade and initial lubrication compatible with that of the bearing is recommended. Alignment between the housing and the shaft prevents parasitic loads and extends service life.

Regarding equivalents, 4-bolt flange housings are interchanged between manufacturers by shaft number, flange outer diameter and hole spacing, not by the commercial part number. Rexnord, Link-Belt and other mounted bearing brands use their own nomenclature, so substitution is defined by comparing critical dimensions and insert type. If you need to replace a ZP6000 with another brand, send us the shaft and flange dimensions and we will indicate the compatible alternative.

MR Accesorios Industriales supplies the Rexnord line in Buenos Aires, Argentina, with more than 80 years of experience in bearings and power transmission. If your equipment carries a ZP6080MMF, ZP6100MMF or any other reference from the ZP6000 series, write to us on WhatsApp with the complete part number and we will quote it shortly. We can also advise you on mounting and the appropriate lubrication for your application.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.