PEER UCPA209-26 pillow block bearing

PEER UCPA209-26 is a reference of pillow block bearing, within Bearing housings. Request a quote for UCPA209-26 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The UCPA housing with PEER insert bearing is an assembled foot-mounted unit, ready to mount on metal structures or beds. It integrates an insert bearing with a spherical outer ring and a housing with a seat that allows self-alignment. It is used in equipment where simple mounting and good tolerance to slight misalignment are required, such as conveyors, fans and agricultural machinery. MR Accesorios Industriales quotes it on WhatsApp with the exact part number.

The UCPA designation identifies the series of foot-mounted housings with insert bearing. The number that follows indicates the size: for example, UCPA201-8 and UCPA202-9 correspond to the smallest sizes, while UCPA205-13 and UCPA205-14 are larger sizes. The suffix after the hyphen refers to the shaft diameter in inches, with variants that allow adjustment to different commercial sizes. When requesting a quote, send the complete part number so we can tell you the equivalent unit.

These housings are used in belt conveyors, bucket elevators, mixers, fans and process equipment in food, chemical and materials plants. In Argentina they are common in the oilseed, meat and agricultural industries, where quick mounting and periodic regreasing simplify maintenance. They are also found in road machinery and irrigation systems, as long as the load is moderate and the environment is not excessively corrosive.

To select correctly, take into account the shaft diameter, the load type and the environmental conditions. The UCPA housing allows slight misalignment thanks to the spherical seat of the insert. If there is dust or moisture, choose versions with reinforced sealing. Lubrication is done through the insert's grease fitting; regreasing according to the duty cycle is advisable. During mounting, make sure the base rests flat and the screws are properly tightened to avoid vibration.

Housing units with insert bearing are interchangeable between brands if the main dimensions match: shaft diameter, hole spacing, height to center and locking type. When replacing, check that the new housing has the same hole spacing and that the insert is compatible with the existing shaft. If the part number on the part is not legible, the equivalent can be found by dimensions. MR Accesorios Industriales advises you to find the unit that best suits your needs.

If you need a UCPA housing with PEER insert bearing, write to us on WhatsApp with the part number or the shaft dimensions. We will quote the exact unit and tell you the compatible alternative if needed. At MR Accesorios Industriales we answer your inquiry shortly.